* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
* #751 Updated channel naming and docs
Updated readme documentation
Consistent naming of Ch across the code.
* #751 Fix message displaying data path
* #751 More improvements
1. Much easier to select channels > Ch6 for FMode, Gain and Panic channels
2. B&W version for smaller screens (128x64).. Memory footprint still a problem.
3. Fix a lot typos/misspell/grammar in the documentation
* Create DSM_AR636_TextGen.lua
Script to show Telemetry TextGen screens
for AR636 Receiver.
Really useful for BLADE helis using the AR636
Could replace dsmPID.lua
Still needs to be ported to smaller screens.
* #751 Enhancements for Lua Script tools
Enhancements
* Delete DSM_AR636_TextGen.lua
The TextGen functionality is included in DSM_AR636_Tel.lua. No longer needed
* Version 0.54
1. Fix problem with "Attitude Trim" Menu
2. New "MINimalistic" version for radios with very low memory
3. Externalized menu messages shared by all versions. the idea is to allow to translate it into other languages.
4. Correction of TextGen tools to work on black&white radios (some Lua functional differences). TextGen will be working on EdgeTx 2,8.3
---------
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
* #751 Updated channel naming and docs
Updated readme documentation
Consistent naming of Ch across the code.
* #751 Fix message displaying data path
* #751 More improvements
1. Much easier to select channels > Ch6 for FMode, Gain and Panic channels
2. B&W version for smaller screens (128x64).. Memory footprint still a problem.
3. Fix a lot typos/misspell/grammar in the documentation
* Create DSM_AR636_TextGen.lua
Script to show Telemetry TextGen screens
for AR636 Receiver.
Really useful for BLADE helis using the AR636
Could replace dsmPID.lua
Still needs to be ported to smaller screens.
* #751 Enhancements for Lua Script tools
Enhancements
* Delete DSM_AR636_TextGen.lua
The TextGen functionality is included in DSM_AR636_Tel.lua. No longer needed
---------
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
* #751 Updated channel naming and docs
Updated readme documentation
Consistent naming of Ch across the code.
* #751 Fix message displaying data path
* #751 More improvements
1. Much easier to select channels > Ch6 for FMode, Gain and Panic channels
2. B&W version for smaller screens (128x64).. Memory footprint still a problem.
3. Fix a lot typos/misspell/grammar in the documentation
* Create DSM_AR636_TextGen.lua
Script to show Telemetry TextGen screens
for AR636 Receiver.
Really useful for BLADE helis using the AR636
Could replace dsmPID.lua
Still needs to be ported to smaller screens.
* #751 Enhancements for Lua Script tools
Enhancements
---------
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
* #751 Updated channel naming and docs
Updated readme documentation
Consistent naming of Ch across the code.
* #751 Fix message displaying data path
* #751 More improvements
1. Much easier to select channels > Ch6 for FMode, Gain and Panic channels
2. B&W version for smaller screens (128x64).. Memory footprint still a problem.
3. Fix a lot typos/misspell/grammar in the documentation
* Create DSM_AR636_TextGen.lua
Script to show Telemetry TextGen screens
for AR636 Receiver.
Really useful for BLADE helis using the AR636
Could replace dsmPID.lua
Still needs to be ported to smaller screens.
---------
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
Maybe newer iteration of Z50. My plane does not have front propeller.
But if there is one, its just for design. This model does not have front motor.
Thanks @pascallanger for support and reviews.
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
* #751 Updated channel naming and docs
Updated readme documentation
Consistent naming of Ch across the code.
* #751 Fix message displaying data path
* #751 More improvements
1. Much easier to select channels > Ch6 for FMode, Gain and Panic channels
2. B&W version for smaller screens (128x64).. Memory footprint still a problem.
3. Fix a lot typos/misspell/grammar in the documentation
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
* #751 Updated channel naming and docs
Updated readme documentation
Consistent naming of Ch across the code.
* #751 Fix message displaying data path
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
* #751 Updated channel naming and docs
Updated readme documentation
Consistent naming of Ch across the code.
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
* #751 More fixes on mixers and servo reverse
-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
* #751
New v0.51 version.
- Added new menus to configure Model/Wing type. Without it, the initial setup will not work properly.
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
* #751
1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
* #751 A few final changes
1. Update channel names to include channel number. i.e: Ch5 (Gear)
2, Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
* #751 more cosmetic things
1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
* #766 More enhacements
Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
* #766 make editable Gain Values
Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
* #766
Change the way to detect that the files exist. now works on both ETX and OTX
* #766 Strange Flickering in OTX
Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem
* #766 Change way of dectecting EdgeTX
Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
* #751
Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
* #751 add check for required libraries
Add check that the required files in DSMLIB exist
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
* #751 Cosmetic and Show Orientation Images
#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
* #751 Fix problems With Reset RX
1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup
2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.
3. Handle RX resets properly. It needed after initial setup
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
* #751 DSM Enhancements
#751 DSM Forward Programming Enhancements (New GUI, etc)
* Make both work on EdgeTx and OpenTX
* #751 Turn OFF simulation by default
Distribution code with RX simulation OFF
Simulation should be only for Development
* #751 Update Readme Documentation
Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake
Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
Reversing 'Off' and 'On' text values in lines #555 and #556. They are used in the SAFE and AS3X menu items in the DSM Forward Programming section, and they are functioning backwards. This will correct the issue. This is the fix for Issue #728
