72 Commits

Author SHA1 Message Date
pascallanger
995bb921c1 DM002 protocol
protocol number 33
sub_protocol none=0
ch5=flip
ch6=led
ch7=headless
2017-03-22 14:55:55 +01:00
pascallanger
d7076f5295 PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS 2017-02-28 10:36:35 +01:00
pascallanger
a3927218a6 Futaba middle value 1520 2017-02-24 20:22:28 +01:00
pascallanger
548390b0d7 GW008 protocol addition
Protocol number: 32
No sub_protocol
2017-02-24 11:00:10 +01:00
pascallanger
846e09c7cb Disable low power by default 2017-02-23 11:23:25 +01:00
pascallanger
0c5fae01b5 WAIT_FOR_BIND feature
This feature will not activate the selected protocol unless a bind is
requested using bind from channel or the GUI "Bind" button. It is only
enabled if bind from channel and autobind are set since I think they are
working well together.
The goal is to prevent binding other people's model when powering up the
TX, changing model or scanning through protocols.
There is a new blinking pattern associated to it as well as a new status
"Waiting for bind".
This feature is enabled by default in _config.h .
2017-02-10 17:38:07 +01:00
pascallanger
bf5598515e Removed board option in _config.h 2017-02-06 21:51:03 +01:00
pascallanger
877cdec4ea Config.h 2017-02-03 21:08:10 +01:00
pascallanger
21ab94c512 FrSkyD and X telemetry 2017-02-03 21:06:21 +01:00
pascallanger
c7e7a559a6 FrSkyD Telemetry update 2017-01-31 15:26:49 +01:00
pascallanger
4f5dfcc65b Few comments tweak 2017-01-31 09:12:06 +01:00
pascallanger
7ee918ad49 Multiprotocol status
Along with the latest ersky9x version, display the module version and if
a specific protocol is available or not.
2017-01-30 16:11:46 +01:00
pascallanger
ba7290fdda New protocol Q303
Q303 protocol number: 31
Sub ptotocols:
-  Q303 = 0
-  CX35 = 1
- CX10D = 2
- CX10WD = 3
2017-01-24 16:58:48 +01:00
pascallanger
8677e73d75 WK2x01: subprotocols addition
WK2801 number 0, 8 channels, fixed id is not supported
WK2401 number 1, 4 channels
W6_5_1 number 2, 6 channels
W6_6_1 number 3, 7 channels
W6_HEL number 4, 6 channels, option is used to limit COL
W6_HEL_I number 5, 6 channels, COL inverted, option is used to limit COL
2017-01-03 19:56:20 +01:00
pascallanger
fbb919d767 New protocol WK2x01
Protocol WK2x01 number 30
Sub protocols:
- WK2801 number 0, 8 channels, fixed id not supported
- WK2601 number 1, 6/7 channels, option is used see doc for details
- WK2401 number 2, 4 channels
Extended limits supported
Autobind protocol
Most receivers support WK2801 so always start trying this sub protocol
first.
2017-01-03 19:19:53 +01:00
pascallanger
43956bbf2c Bind channel fix 2017-01-02 17:45:08 +01:00
pascallanger
18e31b3821 Bind channel: configurable channel number
Bind channel can be configured between 5 and 16.
2017-01-02 17:26:35 +01:00
pascallanger
0d0acb9d10 Bind function on channel 16
Toggling channel 16 (-100%->+100%->-100%) will execute a bind only if
the loaded protocol is an autobind protocol or autobind is set AND
throttle is low (below -95%).
2017-01-02 17:04:50 +01:00
pascallanger
7bb26a7f07 FrSkyD and FrSkyX: random frequencies 2016-12-21 18:06:03 +01:00
pascallanger
f56c9deb00 MULTI_TELEMETRY: couple of additions 2016-12-19 17:33:30 +01:00
Arne Schwabe
a196b71d36 Implement Multiprotocol Telemetry
This allows the multi module to tell the TX software (e.g. OpenTX) which telemetry protocol is in use. Also Status of the module and signaling binding/invalid protocol
2016-12-18 15:40:05 +01:00
pascallanger
67d0e9d2c2 MJXQ: Fixed E010 and added H26WH
Protocol: 18
Sub_protocol for H26WH: 5
2016-12-13 14:58:02 +01:00
pascallanger
f69aae550f Hontai: new sub_protocol FQ777_951
Protocol: 26
Sub protocol: 3
2016-12-12 18:07:43 +01:00
pascallanger
8dec1453c4 FY326: new sub protocol FY319
Protocol: 20
Sub_protocol: 1
Untested
2016-12-12 15:47:58 +01:00
pascallanger
87de5b5305 V2X2: new subprotocol JXD506
Protocol number: 5
Subprotocol: 1
2016-12-12 11:20:33 +01:00
pascallanger
758779a8f5 MJXQ/E010: TX IDs vs Freq 2016-12-09 16:54:24 +01:00
pascallanger
3904c36a6e New MT99xx subprotocol FY805
Protocol: MT99xx (number 17)
Subprotocol: FY805 (number 4)
Supports headless and flip. For flip I'm not sure of the flag since it
was missing from the dumps.
Untested protocol...
2016-12-09 10:19:35 +01:00
pascallanger
36cb0fb4cd Bad _config.h file pushed... 2016-12-08 15:11:06 +01:00
pascallanger
dfd8d0fa3d Added: Bayang telemetry
Changed telemetry configuration and validation for AFHDS2A and HUBSAN
Added default Bayang telemetry from Silverxxx:
- Option=1 to activate telemetry (option=0 -> standard Bayang protocol)
- Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery
voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
pascallanger
7d7ca11c81 Telemetry: volatile 2016-12-05 21:51:27 +01:00
pascallanger
3fa40b2303 Bayang: add sub_protocol H8S3D
Protocol: 14
Sub_protocol: 1
2016-12-02 10:19:42 +01:00
pascallanger
33d676e1fe Core: option to reverse input channels 2016-12-01 22:30:27 +01:00
pascallanger
2d90844239 Flysky: addition of sub_protocol CX20
sub_protocol=4
7 channels
supports bind and extended channels
Only 1 TXID supported for now
2016-11-29 22:30:13 +01:00
pascallanger
c9de0b4cf2 Q2X2 protocol addition for Q222/Q242/Q282
Q2X2 protocol : 29
Sub-protocols:
- Q222 : 0
- Q242 : 1
- Q282 : 2
2016-11-23 21:56:00 +01:00
pascallanger
27b3a86155 SLT Vista format 2016-11-23 15:35:27 +01:00
pascallanger
6ad9fb8f27 AFHDS2A sub protocols and validation 2016-11-06 16:36:44 +01:00
Arne Schwabe
7840438bfc Allow TX to request forwarding of FlySky telemetry data 2016-11-05 01:21:26 +01:00
pascallanger
999c630c5a AFHDS2A protocol addition: UNTESTED
Protocol number: 28
Sub protocols:  PWM_IBUS = 0, PPM_IBUS = 1, PWM_SBUS = 2, PPM_SBUS = 3
Option value =0->50Hz, =1->400Hz, =2->5Hz
Extended channel range supported
Telemetry supported for voltage and RSSI (RX RSSI)
2016-10-20 19:29:52 +02:00
pascallanger
68648b9920 Typos... 2016-10-18 09:27:14 +02:00
pascallanger
f557609e9e STM32 board & DSM fixes
Loads of changes:
STM32 board introduction: NOT TESTED
XMEGA renamed to ORANGE_TX to be more explicit
DSM: added reset if cyrf freezed
Validate: added a validate file to verify the different compilation
options
2016-10-16 19:51:52 +02:00
pascallanger
6bf906f2a7 Added Multiplex TX end points 2016-09-21 22:07:13 +02:00
pascallanger
73aab88109 Some cleanning 2016-09-20 18:27:09 +02:00
pascallanger
fcd47ecec6 Correct pins... 2016-09-19 23:43:14 +02:00
pascallanger
174e6ad637 Merge pull request #15 from bikemike/configurable_pins
made pins configurable and added support for nano
2016-09-19 21:12:08 +02:00
pascallanger
9c55a898f7 New DSM protocol
DSM sub_protocols are now:
- DSM2/1024@22ms
- DSM2/2048@11ms
- DSMX/2048@22ms
- DSMX/2048@11ms
Option=number of channels from 4 to 12 for normal receivers or -4 to -12
fro OrangeRX. An invalid option value will end up with 6 channels.
2016-09-19 18:58:09 +02:00
Mike Morrison
bb9018c094 made pins configurable and added support for nano 2016-09-16 20:34:28 -07:00
pascallanger
d4b85e3b1c Hontai protocol & Bit bashing pause/resume 2016-09-09 18:34:29 +02:00
pascallanger
8b67049863 Added NRF24L01_ReadPayloadLength 2016-09-04 16:49:00 +02:00
pascallanger
4daec3794e Renamed FrSky protocols to match with receivers 2016-09-03 11:49:25 +02:00
pascallanger
e51615f520 DSM2 renamed to DSM 2016-09-01 14:00:49 +02:00