pascallanger
0d5fcb0849
FrskyR9 protocol
2020-01-24 12:12:07 +01:00
Tomer Abramovich
77bf17967d
initial working version of R9M, 8 CH and BINDING support only
2020-01-21 17:42:33 +02:00
pascallanger
e6cab65560
Fix paranthesis...
2020-01-21 10:29:11 +01:00
pascallanger
cc115323e1
Prep for FrSky X v2
2020-01-20 23:52:17 +01:00
pascallanger
25aecbf15e
XK full ID to address and hop freqs generation
2020-01-16 23:43:29 +01:00
pascallanger
e18d8868d2
Protocol Pelikan: hop freq change with RX_num
2020-01-15 16:28:03 +01:00
pascallanger
c6e5d00a2b
Protocol Pelikan: fix rx_tx_addr[1]...
2020-01-14 23:00:50 +01:00
pascallanger
7a5b4dea1a
XK X420/X520: 2 valid IDs
...
IDs are selected using RX num.
2020-01-14 22:51:47 +01:00
pascallanger
5df877f32c
Protocol XK X420: Changed bitrate to 1Mbps
2020-01-14 22:05:30 +01:00
pascallanger
c5c7dda2e0
Update XK X420 channel order
...
Change channel order
Add CH140 for video
2020-01-14 21:25:43 +01:00
pascallanger
492b9e5ed4
New protocol XK
...
Still work in progress
Subprotocols: X450 and X420 -> not sure if they are subprotocols or just different IDs...
CH5: M-Mode=-100%, 6G-Mode=0%, V-Mode=+100%
CH6: Take off momentary switch
CH7: Emergency stop momentary switch
CH8: 3D/6G momentary switch
CH9: Photo momentary switch
2020-01-14 12:19:12 +01:00
pascallanger
9f721c528d
Bayang: rewritten the protocol to be more friendly with main scheduler
2020-01-12 19:42:51 +01:00
pascallanger
7f3c80c2a9
Fix DSM invalid protocol when binding
2020-01-12 18:18:47 +01:00
pascallanger
8f789607e4
Pelikan: add some hopping frequencies
2020-01-12 17:38:30 +01:00
pascallanger
6a9b6ed4be
XN297EMU: option=0->nrf24L01, option!=0 -> CC2500
...
XN297L@250kbps is emulated by default with the NRF24L01. If option (freq tune) is diffrent from 0, the CC2500 module (if installed) will be used instead with option being the freq usual tuning.
2020-01-12 14:06:27 +01:00
pascallanger
8ea4e00d31
Pelikan protocol fix ?
2019-12-20 15:43:44 +01:00
pascallanger
917e27280f
Pelikan and Tiger protocol fixes
2019-12-20 09:29:37 +01:00
pascallanger
ec92edfc85
New protocol Tiger
...
Model: Tiger drone 1400782
Protocol number: 61
No sub_protocol
CH5: Flip
CH6: Light
2019-12-19 23:40:33 +01:00
pascallanger
afd2be6c59
New Pelikan protocol
...
Protocol number: 60
No sub proto
8 channels AETR...
Extended limit supported
!!Only 1 ID for now!!
2019-12-19 22:39:01 +01:00
pascallanger
a23d50bf0d
FrSkyX add bind options CH1-8/CH9-16 & Telem ON/OFF
2019-12-19 17:26:47 +01:00
pascallanger
396c005b0a
BAYANG RX: enables 6 analog channels
...
Fix channels range -100%..+100%
2019-11-29 20:26:10 +01:00
pascallanger
d3c3fac4f7
Multi_names mandatory when using multi_telemetry
...
Validate that sub_proto is valid for the current protocol
Validate that disable channel mapping is valid for the current protocol
2019-11-29 18:50:57 +01:00
Goebish
1f13a6c281
Add Bayang RX protocol
2019-11-29 02:06:58 +01:00
Goebish
69519bdf14
Add skeleton for Bayang RX protocol
2019-11-28 20:02:59 +01:00
pascallanger
c803eeb26a
Esky150: add sub protocols 4CH and 7CH
2019-11-28 17:01:33 +01:00
pascallanger
3067ea3a5c
New protocol: FX816
...
Model P38
Protocol number: 58
Sub protocol: None
Channels: A & T
2019-11-27 12:12:13 +01:00
pascallanger
db442d81dd
Fix all compilation issues (?)
2019-11-11 19:15:39 +01:00
pascallanger
0e40f64c6b
Enable HoTT RX config menu
...
Use OpenTX lua script
2019-11-10 18:55:03 +01:00
pascallanger
dad3282bbb
XN297Dump RF channel display
2019-11-09 19:26:31 +01:00
pascallanger
2686cd0c48
Scanner in blocking mode for best perf
2019-11-09 12:10:34 +01:00
pascallanger
b07b081a15
HoTT telemetry size change
2019-11-07 11:13:48 +01:00
pascallanger
c5d4e8c191
Failsafe improvement
2019-11-07 02:30:03 +01:00
pascallanger
c4c5ffec4f
HoTT: Failsafe
...
Failsafe MUST be configured once with the desired channel values (hold or position) while the RX is up (wait 10+sec for the RX to learn the config) and then failsafe MUST be set to RX/Receiver otherwise the servos will jitter!!!
2019-11-07 01:03:57 +01:00
pascallanger
00f0719659
HoTT: more hop tables
2019-11-05 19:11:28 +01:00
pascallanger
0482627512
HoTT telem
2019-11-05 00:31:20 +01:00
pascallanger
5856442e0f
First HoTT version
2019-11-04 19:16:19 +01:00
pascallanger
7b281e47d6
HoTT work in progress
2019-11-04 09:26:12 +01:00
pascallanger
19b931223b
Changed serial timer source
2019-11-03 15:46:05 +01:00
pascallanger
ca15d7108f
Prep for HoTT protocol and fix STM32 seed
2019-11-02 20:51:41 +01:00
pascallanger
e6e4d33847
Few changes...
2019-11-02 18:13:47 +01:00
pascallanger
815cf4fd99
FrSky X telemetry quick fix
2019-11-01 18:42:45 +01:00
pascallanger
5cf2bf2cf5
Small tweaks
2019-11-01 15:11:31 +01:00
pascallanger
9b499ab7d1
Fix (?) protocol issues
2019-10-31 23:33:10 +01:00
pascallanger
d29461607b
Tweakes
2019-10-29 00:36:57 +01:00
pascallanger
243bdf2240
Merge branch 'master' into SPort_Send
2019-10-29 00:02:59 +01:00
pascallanger
cde185901a
PPM protcols: remove warning when setting negative option values
2019-10-28 23:29:34 +01:00
pascallanger
63d7e32e06
INVERT_TELEMETRY_TX flag
2019-10-27 17:02:38 +01:00
pascallanger
9f1bdc901c
FrSkyX LBT: implement LBT instead of transmitting all the time
...
Needs to be activated using FRSKYX_LBT for now.
2019-10-27 13:20:53 +01:00
pascallanger
61970b028e
AFHDS2A: Fix LQI to channel
2019-10-26 15:40:46 +02:00
pascallanger
0fddd9c119
Fix AFHDS2A RX_LQI forward on CH
...
Hopefully...
2019-10-25 22:03:39 +02:00
