pascallanger
ecfe17915f
V761 telemetry fix
2023-10-09 16:53:17 +02:00
pascallanger
f97aa3597d
Commented out by default E01X protocol and subprotocols to gain flash space
2023-09-27 15:36:53 +02:00
pascallanger
2e1d763d54
V761 telemetry
...
A1 (4.4V -> 2.2V), RSSI equal to 100 means that all telem packets are received and TQLY indicates the number of lost telem packets.
2023-09-26 20:04:35 +02:00
pascallanger
abfebb3da4
QIDI-550 model
...
Using FX/9630
Added trims
!! Need to find out the first RF channel calculation !!
2023-09-02 01:11:37 +02:00
johnnym007
ce5f4ec264
Clone subprotocol for DSM ( #877 )
...
* Init WIP
* Adding a gitignore
* removing gitignore
* RX routines added
* Finished adding clone and erase
* Update _Config.h
* Update Multiprotocol.ino
* Ready for testing
* Refactor to call init on cloned/normal change
* Remove vscode files
* remove TODO comment
* remove unnecessary brackets
---------
Co-authored-by: john.moore <john.moore@amulethotkey.com>
2023-08-27 16:08:10 +02:00
pascallanger
a41123deb2
FrSky Archer Bind
2023-08-26 00:04:36 +02:00
pascallanger
fabb65a2bb
Fix FrSkyX SPORT
2023-08-12 13:17:06 +02:00
pascallanger
eae1329dfe
Add flags for KFPLAN Z61 BF109
2023-08-12 13:16:39 +02:00
pascallanger
8ddee12de5
Update _Config.h
2023-06-04 12:50:39 +02:00
pascallanger
692bcc1fbb
Update Scorpio_cyrf6936.ino
2023-06-04 12:38:09 +02:00
pascallanger
0bb345e3fc
J6Pro save some flash space
2023-06-04 12:20:10 +02:00
pascallanger
c193d0b9dd
Update Multiprotocol.ino
2023-06-04 12:12:22 +02:00
pascallanger
410ce5cc4c
Fixed SX1276 protocol
2023-06-04 12:07:27 +02:00
pascallanger
cefe69a692
Fix SPORT when using FRSKYX (V1) protocol set to EU LBT
2023-06-04 12:03:43 +02:00
pascallanger
daa4ded390
New protocol Scorpio
...
Model Falco 300
2023-06-04 12:02:37 +02:00
richardclli
0fed2486f5
FX9630 protocol support, resolves #801 ( #805 )
...
New protocol FX9630
2023-01-16 20:06:27 +01:00
Filip Kotoucek
11c01004bf
KF606: subprotocol ZC-Z50v2 Cessna ( #797 )
...
Maybe newer iteration of Z50. My plane does not have front propeller.
But if there is one, its just for design. This model does not have front motor.
Thanks @pascallanger for support and reviews.
2023-01-15 21:26:35 +01:00
pascallanger
770a12ffdf
EU
2022-12-08 08:28:45 +01:00
pascallanger
5148449066
FS2A: Turning on/off the LNA during bind.
2022-11-17 20:08:56 +01:00
pascallanger
35f3548992
Compilation option
2022-11-17 10:29:53 +01:00
pascallanger
96405d27b5
Extend Kyosho KT-17 bind time
2022-10-30 11:40:07 +01:00
pascallanger
2bd50f4c8c
V761/TOPRC: new sub protocol
...
Top RC Hobby mini planes
2022-09-26 12:02:38 +02:00
pascallanger
bfc8c2f9fd
Kyosho2/KT-17: only 1 ID
2022-07-20 17:20:27 +02:00
pascallanger
ce6243d6e3
FX/620: IDs
2022-07-17 09:07:28 +02:00
pascallanger
80f9ff4163
Update FX_nrf24l01.ino
2022-07-15 15:44:10 +02:00
pascallanger
d9f8a3989a
FX/FX620: only 1 ID
2022-07-15 15:43:04 +02:00
pascallanger
416f7d5c19
FX/FX620 another try
2022-07-12 08:05:41 +02:00
pascallanger
eb24dd5549
FX/FX620
...
I messed up the hopping, I must have looked at the wrong file.
2022-07-11 11:12:20 +02:00
pascallanger
ba19592973
FX/FX620 debug off
2022-07-11 09:11:11 +02:00
pascallanger
98d8d7fb5f
FX/FX620 new protocol
2022-07-11 09:03:31 +02:00
pascallanger
ad0947b0b7
Updated MT99xx/PA18: need someone to test...
2022-07-09 00:43:28 +02:00
pascallanger
e085602a6c
FX816 is not limited to the P38
2022-07-08 09:46:28 +02:00
Michael
ef1bb1ead7
adjusted comment according to change in commit da33df43 ( #696 )
2022-07-07 11:44:46 +02:00
pascallanger
0a0463652b
E129/C186 protocol
...
C186/E120 models
2022-06-27 16:59:48 +02:00
Michael
0616cab386
Fixes a problem where setting failsafe values was only possible once after bind and only set values for the first 12 channels. This fix allows setting failsafe values without having to rebind and sets failsafe values correctly for all possible 16 channels. ( #695 )
...
Notes for OpenTX/EdgeTX:
This fix doesn't exhibit servo jitter if failsafe mode was left on Custom, however it is still recommended to set failsafe mode back to Receiver after setting failsafe values.
It is still necessary to wait at least 8 seconds switching back from failsafe mode Custom to failsafe mode Receiver as OpenTX/EdgeTX will trigger the data transfer in Custom mode only every 7 seconds.
Bench tested with HoTT receivers GR-16, GR-24pro, GR-32
Flight tested with HoTT receiver GR-24
2022-06-13 14:28:21 +02:00
Pascal Langer
3fe6dc64fa
KF606/MIG320: Added LED control
2022-04-15 17:29:25 +02:00
Pascal Langer
5987aa40a6
Another try on PA18
2022-01-25 15:21:22 +01:00
Pascal Langer
30cb812549
Try PA18
2022-01-24 08:36:00 +01:00
Pascal Langer
0fd2e36046
test PA18
2022-01-23 19:08:46 +01:00
Pascal Langer
8b05e55ebd
MT99xx2/PA18: new protocol
2022-01-23 17:56:00 +01:00
Pascal Langer
af71a208fd
Ready for release
2022-01-16 11:00:50 +01:00
Pascal Langer
97c6088715
fix compilation?
2021-11-13 19:08:38 +01:00
Pascal Langer
db017c73b6
HS6200 emulation using CYRF for E01X protocol
2021-11-13 19:03:01 +01:00
Michael
da33df4346
added packet_in[14] to transfer HoTT device warnings to OpenTx ( #627 )
2021-11-04 14:57:25 +01:00
Pascal Langer
c0bc64c2aa
V911S: increased bind time
2021-10-24 12:03:09 +02:00
Pascal Langer
694d968e8c
Update Propel_nrf24l01.ino
2021-10-24 11:04:57 +02:00
Pascal Langer
fff3b8830e
MT99xx/A180: F949S flags for RATE, RXLED and 3D6G
2021-10-24 11:04:44 +02:00
Pascal Langer
b740f4cd24
V911S/E119: add 6G_3D channel for P40 plane
2021-10-24 09:57:24 +02:00
Pascal Langer
4f7af553d1
Update doc
2021-09-17 17:07:15 +02:00
Pascal Langer
b6e665b567
Devo: fix typo
2021-09-16 16:13:39 +02:00
