From ff817cd0984b7db5b99c3751c26846fa6912cc77 Mon Sep 17 00:00:00 2001 From: pascallanger Date: Mon, 8 Mar 2021 11:36:59 +0100 Subject: [PATCH] Update Protocols_Details.md --- Protocols_Details.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Protocols_Details.md b/Protocols_Details.md index 66e42ae..acbe0d7 100644 --- a/Protocols_Details.md +++ b/Protocols_Details.md @@ -261,7 +261,7 @@ Available in OpenTX 2.3.3, Trainer Mode Master/Multi ### Sub_protocol CPPM - *1* Sending trainer channels to FrSky radios through telemetry does not work since the telemetry lines of the internal and external modules are shared (hardware limitation). On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio. -Hardware modification: add a 1K resistor between the STM32 USART1.TX pin (Boot0 programming TX pin) and the radio bay pin 2 (from top). +For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page. ## HEIGHT - *53* @@ -531,7 +531,7 @@ Use the telemetry to send the trainer information to the radio. ### Sub_protocol CPPM - *1* Sending trainer channels to FrSky radios through telemetry does not work since the telemetry lines of the internal and external modules are shared (hardware limitation). On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio. -Hardware modification: add a 1K resistor between the STM32 USART1.TX pin (Boot0 programming TX pin) and the radio bay pin 2 (from top). +For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page. ## E010R5 - *81* Models: E010 R5 red boards, JJRC H36, H36F and H36S @@ -790,9 +790,9 @@ Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it. Low power: enable/disable the LNA stage on the RF component to use depending on the distance with the TX. ### Sub_protocol CPPM - *3* -Equivalent to Multi but sending trainer channels to FrSky radios through telemetry does not work since the telemetry lines of the internal and external modules are shared (hardware limitation). +Sending trainer channels to FrSky radios through telemetry does not work since the telemetry lines of the internal and external modules are shared (hardware limitation). On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio. -Hardware modification: add a 1K resistor between the STM32 USART1.TX pin (Boot0 programming TX pin) and the radio bay pin 2 (from top). +For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page. ### Sub_protocol CloneTX - *1* This subprotocol makes a clone of a TX identifier transmitting FrSkyD/D8, FrSkyX/D16 v1.xxx FCC/LBT and FrSkyX/D16 v2.1.0 FCC/LBT. @@ -1157,7 +1157,7 @@ Available in OpenTX 2.3.3, Trainer Mode Master/Multi ### Sub_protocol CPPM - *1* Sending trainer channels to FrSky radios through telemetry does not work since the telemetry lines of the internal and external modules are shared (hardware limitation). On a STM32 module and with a simple hardware modification, you can go around this limitation using CPPM to send the trainer information to the radio. -Hardware modification: add a 1K resistor between the STM32 USART1.TX pin (Boot0 programming TX pin) and the radio bay pin 2 (from top). +For more information check the [CCPM Hardware Modification](/docs/CPPM_HW_Mod.md) page. ## BUGSMINI - *42* Models: MJX Bugs 3 Mini and 3H