gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-01 19:33:14 +00:00
Code Issues Projects Releases Wiki Activity

WIP: Advanced topics

Browse Source
This commit is contained in:
Pascal Langer
2019-08-20 14:01:56 +02:00
parent 4dcc88ba32
commit fecf2805c7
4 changed files with 29 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
docs/Advanced_Debug.md
View File

@@ -6,10 +6,14 @@ Procedure to use serial debug:
1. Edit the file [Multiprotocol.ino](../Multiprotocol/Multiprotocol.ino#L26)
1. Modify at the begining of the file the line: `//#define DEBUG_SERIAL` by removing the // leaving only: `#define DEBUG_SERIAL`
1. Save the file
1. Upload the firmware to the module:
iRangeX+, Banggood and old Jumper 4in1 modules|Recent Jumper 4in1 modules with built-in CP2102|FTDI
----------------------------------------------|-----------------------------------
Use the Upload method:"Upload via USB"|Use the Upload method: "Upload via Serial (FTDI)|Use the Upload method: "Upload via Serial (FTDI)
Do not disconnect the USB cable. In case you have to do it, you have to connect the module, close and reopen the Serial Monitor to get the module working.|Do not disconnect the USB cable. In case you have to do it, you have to power first the TX and then connect the USB cable to the module and relaunch the Serial monitor.|No restrictions apart from relaunching the Serial monitor if you disconnect the FTDI from the PC
1. Power on the TX
1. Open in the Arduino IDE the Serial Monitor: Tools->Serial Monitor or Ctrl+Shift+M<br> <img src="images/Serial_Monitor_1.png" />
1. Make sure the settings at the bottom of the Serial Monitor window are the same as the picture above especially the baud rate set to 115200 baud
1. Upload the firmware to the module as you usually do with the Arduino IDE and **do not disconnect the USB cable or FTDI**
1. The Serial Monitor window should show the module booting and more depending on the protocol currently loaded<br> <img src="images/Serial_Monitor_2.png" />
1. The Serial Monitor window should show the module booting, selection of a different protocol and more depending on the protocol currently loaded<br> <img src="images/Serial_Monitor_2.png" />
1. At this stage you can test whatever is needed or have been instructed to do. You can easily select text in the window to copy and paste it on the forum or in a text file.
1. **Important:** to use your module normally and before flying you must reupload the firmware with the debug line commented: `//#define DEBUG_SERIAL`
1. **Important:** to use your module normally and before flying you must reupload the firmware as you usually do with the debug line commented: `//#define DEBUG_SERIAL`