gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-11 00:28:14 +00:00
Code Issues Projects Releases Wiki Activity

Update BOM_DIY_STM32 & Schematic.md

Browse Source
This commit is contained in:
pascallanger 2017-02-01 14:13:24 +01:00 committed by GitHub
parent f0e3d492d3
commit fd49c02e18
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/BOM_DIY_STM32 & Schematic.md
View File

@ -11,7 +11,7 @@ Digikey may not be your preferred supplier, but you should find enough informati
## IMPORTANT NOTE on Telemetry ## IMPORTANT NOTE on Telemetry
In the case of the Turnigy 9X/9XR/9XR Pro you don't need to invert the telemetry signal therefore the instalation of the inverter chip SN74LVC2G86DCUR is **OPTIONAL**. In this case and in order to have telemetry you need to solder **SJ1/SJ301** on the back of the board depending on which board version you have. In the case of the Turnigy 9X/9XR/9XR Pro you don't need to invert the telemetry signal therefore the instalation of the inverter chip SN74LVC2G86DCUR is **OPTIONAL**. In this case and in order to have telemetry you need to solder **SJ1/SJ301** on the back of the board depending on which board version you have.
The inverted telemetry signal is required by TARANIS TX and other boards so for telemetry to work propperly, the inverter chip must be installed. The inverted telemetry signal is required by TARANIS TX and other boards so for telemetry to work properly the inverter chip must be installed.
## BOM DIY STM32 PCB V1.0t - the USB version ## BOM DIY STM32 PCB V1.0t - the USB version
This BOM is for the board with the USB port for firmware uploading that looks like this - check carefully: This BOM is for the board with the USB port for firmware uploading that looks like this - check carefully: