From fd49c02e18af12ad8befe34ae03259d6ed613b6b Mon Sep 17 00:00:00 2001 From: pascallanger Date: Wed, 1 Feb 2017 14:13:24 +0100 Subject: [PATCH] Update BOM_DIY_STM32 & Schematic.md --- docs/BOM_DIY_STM32 & Schematic.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/BOM_DIY_STM32 & Schematic.md b/docs/BOM_DIY_STM32 & Schematic.md index 28b3674..6cc8173 100644 --- a/docs/BOM_DIY_STM32 & Schematic.md +++ b/docs/BOM_DIY_STM32 & Schematic.md @@ -11,7 +11,7 @@ Digikey may not be your preferred supplier, but you should find enough informati ## IMPORTANT NOTE on Telemetry In the case of the Turnigy 9X/9XR/9XR Pro you don't need to invert the telemetry signal therefore the instalation of the inverter chip SN74LVC2G86DCUR is **OPTIONAL**. In this case and in order to have telemetry you need to solder **SJ1/SJ301** on the back of the board depending on which board version you have. -The inverted telemetry signal is required by TARANIS TX and other boards so for telemetry to work propperly, the inverter chip must be installed. +The inverted telemetry signal is required by TARANIS TX and other boards so for telemetry to work properly the inverter chip must be installed. ## BOM DIY STM32 PCB V1.0t - the USB version This BOM is for the board with the USB port for firmware uploading that looks like this - check carefully: