gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 10:17:53 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling_STM32.md

Browse Source
This commit is contained in:
pascallanger 2018-08-12 17:55:57 +02:00 committed by GitHub
parent 23da318645
commit fbb04ea88a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Compiling_STM32.md
View File

@ -111,7 +111,7 @@ The wiring for the USB-to-TTL adapter is:
**It is critical to ensure that the USB-to-TTL adapter is set to 3.3V**.
| **DIY Multiprotocol** | **Banggood 4-in-1** | **iRangeX IRX4** | **Jumper 4-in-1** |
|:---:|:---:|:---:|
|:---:|:---:|:---:|:---:|
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-ch340g.jpg" height="200"/> | <img src="images/irx4-ch340g.jpg" height="200"/> | <img src="images/Jumper-ch340g.jpg" height="200"/> |
1. Put the module in the transmitter
@ -124,7 +124,7 @@ In order to flash the bootloader the **BOOT0** jumper must be installed connecti
| **DIY Multiprotocol** | **Banggood 4-in-1** | **iRangeX IRX4** | **iRangeX IRX4 Plus** | **Jumper 4-in-1** | **Vantac MPM Lite** |
|:---:|:---:|:---:|:---:|:---:|:---:|
| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. | Bridge the BOOT0 pin to the adjacent 3.3V pin as shown by the yellow jumper. If it doesn't work move the jumper to bridge the two left hand pins (BOOT0 and directly above). | Bridge pins 1 and 2 as shown by the red jumper wire. | Brdige the two pins next to the usb port labelled with Boot0 |
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/> | <img src="images/irx4-boot0.jpg" height="200"/> | <img src="images/irx4plus-boot0.jpg" height="200"/> | <img src="Jumper-ch340g.jpg" height="200"/> | <img src="images/mpmlite-boot0.jpg" width="200" /> |
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/> | <img src="images/irx4-boot0.jpg" height="200"/> | <img src="images/irx4plus-boot0.jpg" height="200"/> | <img src="images/Jumper-ch340g.jpg" height="200"/> | <img src="images/mpmlite-boot0.jpg" width="200" /> |
1. If on Linux, ensure you have permissions to access serial interfaces as described in [Install the Maple USB drivers](#install-the-maple-usb-drivers)
1. Install the **BOOT0** jumper as described above.