gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-14 03:23:15 +00:00
Code Issues Projects Releases Wiki Activity

update Compiling_STM32 doc_3

Browse Source
This commit is contained in:
midelic
2017-08-04 17:50:04 +03:00
parent 98f848138d
commit f824ecb7f9
2 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Compiling_STM32.md
View File

@@ -91,12 +91,12 @@ Notes:
1. Flash new STM32 bootloader(StmBoot) on multimodule.You have 2 options here.You can use one or the other.
- Flash precompiled binary **StmBoot.ino.generic_stm32f103c** using **ST Flash loader demonstrator** and USB serial device(FTDI) , with same custom cable presented above.This process is the same as flashing with precompiled binaries.For BG(green) module you can folow the paper instructions for flashing coming with the module using bridge pins provided.
- Or you can compile Stmboot files yourself ,**Stmboot.ino** file using arduino IDE ,select Tools ,Upload method ,**"Serial" **and press upload button.All this setup is using the same custom cable and USB-serial device(FTDI) as before.
- Or you can compile Stmboot files yourself ,**Stmboot.ino** file using arduino IDE ,select Tools ,Upload method : **"Serial"** and press upload button.All this setup is using the same custom cable and USB-serial device(FTDI) as before.
- After this process is complete switch off TX,remove cables FTDI serila device and/or mutimodule jumper used for flashing.The multimodule should be back inthe same state as before.
1. Compile multiprotocol source in arduino IDE ,choose this time Upload method **STM32duino bootloader** ,select **"Export compiled Binary"** to show the binary file in the same folder as source.
1. Take copy of the resulted binary file, to TX radio SD card ,the firmware folder.
1. Now flash the TX radio with the last firmware(for ersky9x is version P221 "e2" test version and higher).
1. Now flash the TX radio with the last firmware(for ersky9x is version P221 "e2" test version or higher).
1. Enter in TX radio maintenance mode(for ersky9X start TX radio with both bottom trims pushed outwards).Select **Update multi** press menu button select also the right com port,update ,then the multiprotocol.bin file (see the correct name) and press menu and again for flashing. You'll see a bar fill slowly .Wait for the procces to be complete.Press exit( or switch off TX) several times to come out of the maintenace mode.
1. Any subsequent update of the multiprotocol will follow 2-3 and 5-6 steps.There is no need anymore USB serial device or cables for flashing.