From f77bdd233b3e8870de9e8bba541fbaac1b1e8677 Mon Sep 17 00:00:00 2001 From: gerrievanzyl Date: Tue, 4 Oct 2016 20:29:14 -0400 Subject: [PATCH] Update Transmitters.md --- docs/Transmitters.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/Transmitters.md b/docs/Transmitters.md index d36444c..ace0151 100644 --- a/docs/Transmitters.md +++ b/docs/Transmitters.md @@ -63,7 +63,7 @@ Click on your transmitter above to view specific setup instructions. ##Optional Telemetry mod for 9X/r TH9X transmitters -The telemetry mod for these transmitters has evolved. The original and popular "FrSky Telemetry Mod" requires 2 pins on the transmitter module board to be modified (RX on pin 5 and TX on pin 2). All the recent MPTM hardware options supports serial transmission on pin 1 (the same pin as the PPM signal) so, in this case, only the mod on pin 5 is required. +The telemetry mod for these transmitters has evolved. The original and popular "FrSky Telemetry Mod" requires 2 pins on the transmitter module board to be modified (RX on pin 5 and TX on pin 2). All the recent MULTI-Module hardware options supports serial transmission on pin 1 (the same pin as the PPM signal) so, in this case, only the mod on pin 5 is required. A good tutorial to follow is Oscar Liang's [here](http://blog.oscarliang.net/turnigy-9x-advance-mod/) but when you get to wiring up the Tx Module bay pins, you only need to perform the steps relevant for Pin 5.