gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-13 19:13:14 +00:00
Code Issues Projects Releases Wiki Activity

Update Protocols_Details.md

Browse Source
This commit is contained in:
pascallanger
2018-02-11 14:35:04 +01:00
committed by GitHub
parent 4a9d295f1a
commit f6ef136502
1 changed files with 14 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
Protocols_Details.md
View File

@@ -38,9 +38,20 @@ The protocol selection is based on 2 parameters:
- the number of LED flash indicates the bank number (1 to 5 flash) - the number of LED flash indicates the bank number (1 to 5 flash)
- to go to the next bank, short press the bind button, this action is confirmed by the LED staying on for 1.5 sec - to go to the next bank, short press the bind button, this action is confirmed by the LED staying on for 1.5 sec
The default protocol mapping can be seen at the end of the file [_Config.h](/Multiprotocol/_Config.h). Here is the full protocol selection procedure:
* turn the dial to 15
**Note: the protocol selection must be done before the module is turned on** * power up the module
* the module displays the current bank by flashing the LED x number of times, x being between 1 and up to 5
* a short press on the bind button turns the LED on for 1 sec indicating that the system has changed the bank
* repeat operation 3 and 4 until you have reached the bank you want
* power off
* change the dial to the desired position
* power on
* enjoy
Notes:
* **The protocol selection must be done before the module is turned on**
* The protocol mapping based on bank+dial position can be seen/modified at the end of the file [_Config.h](/Multiprotocol/_Config.h)**
# A7105 RF Module # A7105 RF Module