From f6ef1365023d448717892098d34b3f3eb2b212f3 Mon Sep 17 00:00:00 2001 From: pascallanger Date: Sun, 11 Feb 2018 14:35:04 +0100 Subject: [PATCH] Update Protocols_Details.md --- Protocols_Details.md | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/Protocols_Details.md b/Protocols_Details.md index 854c24e..7cb8205 100644 --- a/Protocols_Details.md +++ b/Protocols_Details.md @@ -38,9 +38,20 @@ The protocol selection is based on 2 parameters: - the number of LED flash indicates the bank number (1 to 5 flash) - to go to the next bank, short press the bind button, this action is confirmed by the LED staying on for 1.5 sec -The default protocol mapping can be seen at the end of the file [_Config.h](/Multiprotocol/_Config.h). - -**Note: the protocol selection must be done before the module is turned on** +Here is the full protocol selection procedure: + * turn the dial to 15 + * power up the module + * the module displays the current bank by flashing the LED x number of times, x being between 1 and up to 5 + * a short press on the bind button turns the LED on for 1 sec indicating that the system has changed the bank + * repeat operation 3 and 4 until you have reached the bank you want + * power off + * change the dial to the desired position + * power on + * enjoy + +Notes: + * **The protocol selection must be done before the module is turned on** + * The protocol mapping based on bank+dial position can be seen/modified at the end of the file [_Config.h](/Multiprotocol/_Config.h)** # A7105 RF Module