gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-09 22:38:10 +00:00
Code Issues Projects Releases Wiki Activity

Update Advanced_ATmega_Serial_Uploader.md

Browse Source
This commit is contained in:
gerrievanzyl 2016-10-05 09:03:42 -04:00 committed by GitHub
parent 40dfdf9bb1
commit f0c494ecea
1 changed files with 1 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
docs/Advanced_ATmega_Serial_Uploader.md
View File

@ -28,44 +28,4 @@ Simply flash the .hex file to get the bootloader on the chip, and change the hig
The bootloader only uses 512 bytes of flash and is avaialble for download [here](http://www.rcgroups.com/forums/showatt.php?attachmentid=9291360&d=1472324155). The orginal rcgroups post is [here](http://www.rcgroups.com/forums/showpost.php?p=35584619&postcount=4867).
The HIGH fuse needs to be set to 0xD6. (See the section below on Setting the Fuses with AVRdude.)
## Setting fuses with AVRdude
###Determining the location of the avrdude program
The Arduino IDE is used to upload firmware and set fuses on the ATMega microprocessor.
You can install avrdude on your computer, but it is already contained in the Arduino IDE bundle and we suggest that you use the Arduino-bundled version.
1. Unplug any programmer that may be connected to the computer
1. In the Arduino IDE click on Sketch -> Upload Using Programmer
1. After a series of compiling messages you will see an error that a programmer is not found. Scroll up and find the programming command that caused the errors (usually the last white line before the red errors) and copy it into TextEdit or Notepad.
1. This is your programming command and it should look something like this:
**Mac:**
> ```
> /Applications/Arduino.app/Contents/Java/hardware/tools /avr/bin/avrdude -C/Applications/Arduino.app/Contents/ Java/hardware/tools/avr/etc/avrdude.conf -patmega328p -cusbasp -Pusb -Uflash:w:{this part will be unique to your system} /Multiprotocol.ino.hex:i
> ```
**PC:**
> ```
> C:\Program Files (x86)\Arduino\Contents\Java\hardware\tools\ avr\bin\avrdude -CC:\Program Files (x86)\Arduino\Contents\Java\ hardware\tools\avr\etc\avrdude.conf -patmega328p -cusbasp -Pusb -Uflash:w:{this part will be unique on your system}\ Multiprotocol.ino.hex:i
> ```
Select all the text up to the ```-Uflash ``` command, copy it and paste it into a new line and add a “-v” (without the "") at the end of the line.
This is your “verify” command and it should look something like this:
> ```
> /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino.app/Contents/Java/hardware/ tools/avr/etc/avrdude.conf -patmega328p -cusbasp -Pusb -v
> ```
We will be using these two commands to program the module.
1. Verify that the connection is working by pasting the Verify line into a terminal. You should see output that includes the fuse settings.
2. 1. To program the High Fuse copy the “verify” command and paste it into the shell add the following text to the end of the line ```-U hfuse:w:0xD6:m ``` . Press Enter.
The HIGH fuse needs to be set to 0xD6. (See the section on [Manually Setting the ATmega328 Fuses](Advanced_Manually_Setting_ATmega328_Fuses.md).)