gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 20:48:12 +00:00
Code Issues Projects Releases Wiki Activity

Update Protocols_Details.md

Browse Source
This commit is contained in:
pascallanger 2019-12-04 10:58:40 +01:00
parent 0008633d6e
commit e9b09ffecd
1 changed files with 1 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Protocols_Details.md
View File

@ -22,8 +22,7 @@ Here are detailed descriptions of every supported protocols (sorted by RF module
- Bind channel is going from -100% to +100% - Bind channel is going from -100% to +100%
* Additional notes: * Additional notes:
- It's recommended to combine Throttle cut with another button to drive the bind channel. This will prevent to launch a bind while flying... - **It's recommended to combine the bind switch with Throttle cut or throttle at -100% to drive the bind channel. This will prevent to launch a bind while flying** and enable you to use the bind switch for something else.
- Bind channel does not have to be assigned to a free channel. Since it only acts when Throttle is Low (and throttle cut active), it could be used on the same channel as Flip for example since you are not going to flip your model when Throttle is low... Same goes for RTH and such other features.
- Using channel 16 for the bind channel seems the most relevant as only one protocol so far is using 16 channels which is FrSkyX. But even on FrSkyX this feature won't have any impact since there is NO valid reason to have Autobind set to Y for such a protocol. - Using channel 16 for the bind channel seems the most relevant as only one protocol so far is using 16 channels which is FrSkyX. But even on FrSkyX this feature won't have any impact since there is NO valid reason to have Autobind set to Y for such a protocol.
## Protocol selection in PPM mode ## Protocol selection in PPM mode