gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 20:48:12 +00:00
Code Issues Projects Releases Wiki Activity

XN297L CC2500 emulation

Browse Source
This commit is contained in:
pascallanger 2019-06-05 23:31:17 +02:00 committed by GitHub
parent 1fa6e4526b
commit e96186015d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 6 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Protocols_Details.md
View File

@ -852,6 +852,8 @@ Model: KF606
If the model does not respond well to inputs or hard to bind, you can try to set Power to Low. But this protocol is known to be problematic because it's using the xn297L emulation with a transmission speed of 250kbps therefore it doesn't work very well with every modules, this is an hardware issue with the accuracy of the components used and nothing we can do about it in the firmware.
If a CC2500 rf component is available it will be used in place of the NRF24L01 which might fix the issue mentioned above. Option is used for fine frequency tuning like any CC2500 protocols. Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it if necessary.
CH1|CH2|CH3|CH4|CH5
---|---|---|---|---
A||T||TRIM
@ -877,8 +879,7 @@ Only 3 TX IDs available, change RX_Num value 0..2 to cycle through them
If the model does not respond well to inputs or hard to bind, you can try to set Power to Low. But this protocol is known to be problematic because it's using the xn297L emulation with a transmission speed of 250kbps therefore it doesn't work very well with every modules, this is an hardware issue with the accuracy of the components used and nothing we can do about it in the firmware.
If a CC2500 module is available it will be used in place of the NRF24L01, fixing the issue mentioned above. When using a CC2500 module, Option for this protocol corresponds to fine frequency tuning.
Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it if necessary.
If a CC2500 rf component is available it will be used in place of the NRF24L01 which might fix the issue mentioned above. Option is used for fine frequency tuning like any CC2500 protocols. Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it if necessary.
### Sub_protocol H26WH - *5*
CH6|
@ -905,6 +906,7 @@ Models: MT99xx
Models: Eachine H7, Cheerson CX023
### Sub_protocol YZ - *2*
Model: Yi Zhan i6S
Only one model can be flown at the same time since the ID is hardcoded.
If the model does not respond well to inputs or hard to bind, you can try to set Power to Low. But this protocol is known to be problematic because it's using the xn297L emulation with a transmission speed of 250kbps therefore it doesn't work very well with every modules, this is an hardware issue with the accuracy of the components used and nothing we can do about it in the firmware.
@ -1121,6 +1123,8 @@ Models: WLtoys V911S, XK A110
If the model does not respond well to inputs or hard to bind, you can try to set Power to Low. But this protocol is known to be problematic because it's using the xn297L emulation with a transmission speed of 250kbps therefore it doesn't work very well with every modules, this is an hardware issue with the accuracy of the components used and nothing we can do about it in the firmware.
If a CC2500 rf component is available it will be used in place of the NRF24L01 which might fix the issue mentioned above. Option is used for fine frequency tuning like any CC2500 protocols. Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it if necessary.
CH1|CH2|CH3|CH4|CH5
---|---|---|---|---
A|E|T|R|CALIB