gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-23 10:23:15 +00:00
Code Issues Projects Releases Wiki Activity

New XN297L 250Kbps emu layer based on CC2500

Browse Source 
This layer can be enabled/disabled with the option XN297L_CC2500_EMU in _config.h
Protocols which are using it so far:
GD00X, KF606 and MJXQ/E010&PHOENIX
This commit is contained in:
Pascal Langer
2019-06-05 21:54:47 +02:00
parent 17c67cc780
commit e8c6225ef0
9 changed files with 283 additions and 208 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Multiprotocol/_Config.h
View File

@@ -29,8 +29,8 @@
/*************************/
/*** BOOTLOADER USE ***/
/*************************/
//Allow flashing multimodule directly with TX(erky9x or opentx modified firmwares)
//Instructions: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/tree/master/BootLoaders#compiling--uploading-firmware-with-the-flash-from-tx-bootloader
//Allow flashing multimodule directly with TX(erky9x or opentx maintenance mode)
//Instructions:https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Flash_from_Tx.md
//To enable this feature remove the "//" on the next line. Requires a compatible bootloader or upload method to be selected when you use the Multi 4-in-1 Boards Manager definitions.
//#define CHECK_FOR_BOOTLOADER
@@ -78,6 +78,9 @@
#define CC2500_INSTALLED
#define NRF24L01_INSTALLED
//If available use the CC2500 to emulate the XN297L @250Kbps instead of the NRF24L01. Comment to disable.
#define XN297L_CC2500_EMU
/** OrangeRX TX **/
//If you compile for the OrangeRX TX module you need to select the correct board type.
//By default the compilation is done for the GREEN board, to switch to a BLUE board uncomment the line below by removing the "//"