gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 19:58:13 +00:00
Code Issues Projects Releases Wiki Activity

E016H: Calibration on channel 8

Browse Source
This commit is contained in:
Pascal Langer 2020-12-19 12:16:51 +01:00
parent b94f774f80
commit e79ca9b7d7
4 changed files with 15 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Lua_scripts/MultiChan.txt
View File

@ -178,4 +178,4 @@
52,0,ZSX,280,1,Light 52,0,ZSX,280,1,Light
78,0,M-Link,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16 78,0,M-Link,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14,CH15,CH16
79,0,WFLY2,RF20x,0,CH5,CH6,CH7,CH8,CH9,CH10 79,0,WFLY2,RF20x,0,CH5,CH6,CH7,CH8,CH9,CH10
80,0,E016Hv2,E016Hv2,1,TakLan,EmStop,Flip,HLess,RTH 80,0,E016Hv2,E016Hv2,1,TakLan,EmStop,Flip,Calib,HLess,RTH

13
Multiprotocol/E016HV2_cc2500.ino
View File

@ -71,9 +71,14 @@ static void __attribute__((unused)) E016HV2_send_packet()
packet[7 ] = channel; packet[7 ] = channel;
//flags //flags
packet[8 ] = GET_FLAG(CH7_SW, 0x01) // 0x01=Flip if(CH8_SW && !phase) //toggle calib flag
| GET_FLAG(CH8_SW, 0x02) // 0x02=Headless flags ^= 0x40;
| GET_FLAG(CH9_SW, 0x04); // 0x04=One Key Return phase=CH8_SW;
packet[8 ] = GET_FLAG(CH7_SW, 0x01) // 0x01=Flip
| GET_FLAG(CH9_SW, 0x02) // 0x02=Headless
| GET_FLAG(CH10_SW, 0x04) // 0x04=One Key Return
| flags; // 0x40=Calib
packet[9 ] = 0x02; // Speed control 0x00:low, 0x01:medium, 0x02:high packet[9 ] = 0x02; // Speed control 0x00:low, 0x01:medium, 0x02:high
@ -154,6 +159,8 @@ uint16_t initE016HV2()
rf_ch_num-=2; rf_ch_num-=2;
} }
phase=CH8_SW;
flags=0;
bind_counter = E016HV2_BIND_COUNT; bind_counter = E016HV2_BIND_COUNT;
BIND_IN_PROGRESS; // Autobind protocol BIND_IN_PROGRESS; // Autobind protocol
return E016HV2_INITIAL_WAIT; return E016HV2_INITIAL_WAIT;

2
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1 #define VERSION_MAJOR 1
#define VERSION_MINOR 3 #define VERSION_MINOR 3
#define VERSION_REVISION 1 #define VERSION_REVISION 1
#define VERSION_PATCH_LEVEL 91 #define VERSION_PATCH_LEVEL 92
//****************** //******************
// Protocols // Protocols

6
Protocols_Details.md
View File

@ -382,9 +382,9 @@ Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it.
**Again make sure to set the RF frequency right to be able to bind**. FYI, on my module I needed +80. **Again make sure to set the RF frequency right to be able to bind**. FYI, on my module I needed +80.
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10
---|---|---|---|---|---|---|--- ---|---|---|---|---|---|---|---|---|----
A|E|T|R|TAKE_OFF/LANDING|EMERGENCY|FLIP|HEADLESS|RTH A|E|T|R|TAKE_OFF/LANDING|EMERGENCY|FLIP|CALIB|HEADLESS|RTH
TAKE_OFF/LANDING: this is a momentary switch to arm the motors or land the quad. This switch is not really needed as you can start the quad with throttle low then increase throttle until the motor arms and continue to increase to lift off; To land just bring throttle all the way down, the quad will just stops when touching the ground. TAKE_OFF/LANDING: this is a momentary switch to arm the motors or land the quad. This switch is not really needed as you can start the quad with throttle low then increase throttle until the motor arms and continue to increase to lift off; To land just bring throttle all the way down, the quad will just stops when touching the ground.