gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-13 04:03:15 +00:00
Code Issues Projects Releases Wiki Activity

E016H: Calibration on channel 8

Browse Source
This commit is contained in:
Pascal Langer
2020-12-19 12:16:51 +01:00
parent b94f774f80
commit e79ca9b7d7
4 changed files with 15 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
Protocols_Details.md
View File

@@ -382,9 +382,9 @@ Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it.
**Again make sure to set the RF frequency right to be able to bind**. FYI, on my module I needed +80.
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8
---|---|---|---|---|---|---|---
A|E|T|R|TAKE_OFF/LANDING|EMERGENCY|FLIP|HEADLESS|RTH
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10
---|---|---|---|---|---|---|---|---|----
A|E|T|R|TAKE_OFF/LANDING|EMERGENCY|FLIP|CALIB|HEADLESS|RTH
TAKE_OFF/LANDING: this is a momentary switch to arm the motors or land the quad. This switch is not really needed as you can start the quad with throttle low then increase throttle until the motor arms and continue to increase to lift off; To land just bring throttle all the way down, the quad will just stops when touching the ground.