diff --git a/README.md b/README.md index 54f1a04..dc45b19 100644 --- a/README.md +++ b/README.md @@ -51,7 +51,7 @@ To enable telemetry on Turnigy 9X or 9XR you need to modify your TX following on ###TX ID Each protocol is using a 32bits ID generated randomely at first power up. There are little chances to get a duplicated ID. -It's possible to generate a new ID using bind button on the Hubsan protocolduring power up. +It's possible to generate a new ID using bind button on the Hubsan protocol during power up. ###Bind To bind a model press the bind button, apply power and then release. @@ -123,18 +123,20 @@ Bayang||NRF24L01 Note: - The dial should be set to 0 for serial which means all protocol selection pins should be left unconnected. -###Protocol channels +###Protocol details +Extended limits supported: -125%..+125% can be used and will be transmitted. Otherwise the default is -100%..+100% only. + +Autobind protocol: you do not need to press the bind button at power up to bind, this is done automaticaly. + ####BAYANG -All channels allow -100%..+100% +Autobind protocol CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|FLIP|HEADLESS|RTH -Autobind protocol / do not need to use the bind button - ####CG023 -All channels allow -100%..+100% +Autobind protocol CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- @@ -148,7 +150,7 @@ CH5|CH6|CH7|CH8 FLIP|HEADLESS|PICTURE|VIDEO ####CX10 -All channels allow -125%..+125% +Extended limits supported CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- @@ -156,24 +158,22 @@ A|E|T|R|FLIP|MODE|PICTURE|VIDEO|HEADLESS MODE +100%=mode3 or headless for CX-10A, -100%=mode1, 0%=mode2 -Autobind protocol / do not need to use the bind button - ####DEVO -All channels allow -125%..+125% +Extended limits supported CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8 ####DSM2 -All channels allow -125%..+125% +Extended limits supported CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|CH5|CH6|CH7|CH8 ####FLYSKY -All channels allow -125%..+125% +Extended limits supported CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- @@ -195,17 +195,17 @@ CH5|CH6 BTMBTN|TOPBTN ####FRSKY -All channels allow -125%..+125% +Extended limits supported + +Telemetry enabled for A0, A1, RSSI + +Option=fine frequency tunning, usually 0 or -41 based on the manufacturer boards CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8 -Telemetry enabled for A0, A1, RSSI - ####HISKY -All channels allow -100%..+100% - CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|GEAR|PITCH|GYRO|CH8 @@ -213,28 +213,22 @@ A|E|T|R|GEAR|PITCH|GYRO|CH8 GYRO -100%=6G, +100%=3G ####HK310 -All channels allow -100%..+100% - CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- |||T|R|AUX|T_FSAFE|R_FSAFE|AUX_FSAFE ####HUBSAN -All channels allow -100%..+100% +Autobind protocol + +Telemetry enabled for battery voltage only + +Option=vTX frequency (H107D) 5645 - 5900 MHz CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|FLIP|LIGHT||VIDEO -Option=vTX frequency (H107D) 5645 - 5900 MHz - -Telemetry enabled for battery voltage only - -Autobind protocol / do not need to use the bind button - ####KN -All channels allow -100%..+100% - CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|DR|THOLD|IDLEUP|GYRO3 @@ -242,39 +236,31 @@ A|E|T|R|DR|THOLD|IDLEUP|GYRO3 GYRO3 -100%=6G, +100%=3G ####SLT -All channels allow -100%..+100% +Autobind protocol CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|GEAR|PITCH -Autobind protocol / do not need to use the bind button - ####Symax -All channels allow -100%..+100% +Autobind protocol CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|FLIP||PICTURE|VIDEO|HEADLESS -Autobind protocol / do not need to use the bind button - ####V2X2 -All channels allow -100%..+100% - CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|FLIP|LIGHT|PICTURE|VIDEO|HEADLESS|MAG_CAL_X|MAG_CAL_Y ####YD717 -All channels allow -100%..+100% +Autobind protocol CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16 ---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|---- A|E|T|R|FLIP|LIGHT|PICTURE|VIDEO|HEADLESS -Autobind protocol / do not need to use the bind button - ##Hardware ###RF modules @@ -304,6 +290,7 @@ Using a [home made PCB](http://www.rcgroups.com/forums/showpost.php?p=32645328&p or build your own board using SMD components and an associated PCB: ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952726-108-thumb-image-62c29cf2.jpg?d=1433909893) +![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952733-114-thumb-P4100002.JPG?d=1433910155) ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952734-189-thumb-P4100003.JPG?d=1433910159) ###Schematic ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/a8443844-119-multiprotocol_diagram_rotary_serial_2.jpg)