gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-04 04:27:53 +00:00
Code Issues Projects Releases Wiki Activity

Update _Config.h

Browse Source
This commit is contained in:
johnnym007 2023-08-25 10:18:00 +01:00 committed by GitHub
parent 8bc0c48911
commit e2c4b2850b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
Multiprotocol/_Config.h
View File

@ -41,7 +41,7 @@
//Modify the channel order based on your TX: AETR, TAER, RETA... //Modify the channel order based on your TX: AETR, TAER, RETA...
//Examples: Flysky & DEVO is AETR, JR/Spektrum radio is TAER, Multiplex is AERT... //Examples: Flysky & DEVO is AETR, JR/Spektrum radio is TAER, Multiplex is AERT...
//Default is AETR. //Default is AETR.
#define TAER #define AETR
//Uncomment to reverse the direction of the specified channel for all protocols //Uncomment to reverse the direction of the specified channel for all protocols
//#define REVERSE_AILERON //#define REVERSE_AILERON
@ -74,10 +74,10 @@
//4-in-1 modules have the A7105, CYRF6936, CC2500 and NRF24L01 RF chips installed //4-in-1 modules have the A7105, CYRF6936, CC2500 and NRF24L01 RF chips installed
//5-in-1 modules have all RF chips installed //5-in-1 modules have all RF chips installed
//!!!If a RF chip is present it MUST be marked as installed!!! or weird things will happen you have been warned. //!!!If a RF chip is present it MUST be marked as installed!!! or weird things will happen you have been warned.
//#define A7105_INSTALLED #define A7105_INSTALLED
#define CYRF6936_INSTALLED #define CYRF6936_INSTALLED
#define CC2500_INSTALLED #define CC2500_INSTALLED
//#define NRF24L01_INSTALLED #define NRF24L01_INSTALLED
//#define SX1276_INSTALLED // only supported on STM32 modules //#define SX1276_INSTALLED // only supported on STM32 modules
//Uncomment (remove //) if you have an internal 5-in-1 Multi module in a Jumper T18 or T-Lite. //Uncomment (remove //) if you have an internal 5-in-1 Multi module in a Jumper T18 or T-Lite.
@ -158,7 +158,7 @@
//If you have 2 Multi modules which you want to share the same ID so you can use either to control the same RC model //If you have 2 Multi modules which you want to share the same ID so you can use either to control the same RC model
// then you can force the ID to a certain known value using the lines below. // then you can force the ID to a certain known value using the lines below.
//Default is commented, you should uncoment only for test purpose or if you know exactly what you are doing!!! //Default is commented, you should uncoment only for test purpose or if you know exactly what you are doing!!!
#define FORCE_CYRF_ID "\x54\x51\x67\x8e\x9A\xBC" //#define FORCE_CYRF_ID "\x12\x34\x56\x78\x9A\xBC"
/****************************/ /****************************/
@ -317,7 +317,7 @@
//For er9x it depends if you have an inveter mod or not on the telemetry pin. If you don't have an inverter comment this line. //For er9x it depends if you have an inveter mod or not on the telemetry pin. If you don't have an inverter comment this line.
#define INVERT_TELEMETRY #define INVERT_TELEMETRY
//For STM32 and OrangeRX modules, comment to prevent the TX from forcing the serial telemetry polarity normal/invert. //For STM32 and OrangeRX modules, comment to prevent the TX from forcing the serial telemetry polarity normal/invert.
#define INVERT_TELEMETRY_TXs #define INVERT_TELEMETRY_TX
//Sends Multi status and allow OpenTX and erskyTX to autodetect the telemetry format. Comment to disable. //Sends Multi status and allow OpenTX and erskyTX to autodetect the telemetry format. Comment to disable.
#define MULTI_TELEMETRY #define MULTI_TELEMETRY
@ -379,7 +379,7 @@
/*************************/ /*************************/
//In this section you can configure all details about PPM. //In this section you can configure all details about PPM.
//If you do not plan to use the PPM mode comment this line using "//" to save Flash space, you don't need to configure anything below in this case //If you do not plan to use the PPM mode comment this line using "//" to save Flash space, you don't need to configure anything below in this case
//#define ENABLE_PPM #define ENABLE_PPM
/** TX END POINTS **/ /** TX END POINTS **/
//It is important for the module to know the endpoints of your radio. //It is important for the module to know the endpoints of your radio.
@ -605,6 +605,7 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
PROTO_DSM_RX PROTO_DSM_RX
DSM_RX DSM_RX
DSM_CLONE DSM_CLONE
DSM_ERASE
PROTO_E010R5 PROTO_E010R5
NONE NONE
PROTO_E016H PROTO_E016H