gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-11-03 22:31:04 +00:00
Code Issues Projects Releases Wiki Activity

definitions for direct inputs

Browse Source
This commit is contained in:
Andrew Shkolik 2019-12-24 15:03:35 -06:00
parent 8ea4e00d31
commit e2bbe8a422
1 changed files with 20 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Multiprotocol/_Config.h
View File

@ -488,6 +488,26 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
// - 0x40010000 will give to the protocol the channels in the order 4,2,3,1,5,6,7,8 swapping channel 1 and 4. Note: 0 means leave the channel where it is.
// - 0x0000ABCD will give to the protocol the channels in the order 1,2,3,4,10,11,12,13 which potentially enables acces to channels not available on your TX. Note A=10,B=11,C=12,D=13,E=14,F=15.
/**********************************/
/*** DIRECT INPUTS SETTINGS ***/
/**********************************/
//In this section you can configure the direct inputs.
//It enables switches wired directly to the board
//Current mappings are: AUX1-PB10, AUX2-PB11, AUX3-PA2, AUX4-PA3
//Direct inputs works only in ppm mode and only for stm_32 boards
#if defined(ENABLE_PPM) && defined (STM32_BOARD) && not defined (ENABLE_SERIAL)
//If plan to use direct input mode please uncomment lines below
//#define ENABLE_DIRECT_INPUTS
//
//Direct inputs start channel
//Uncomment and change from what channel direct inputs starts
//#define DIRECT_INPUTS_START 7
//
#endif
#endif
/* Available protocols and associated sub protocols to pick and choose from (Listed in alphabetical order)
PROTO_AFHDS2A
PWM_IBUS