gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-03 12:53:20 +00:00
Code Issues Projects Releases Wiki Activity

OMP: prevent telemetry voltage from rolling over

Browse Source
This commit is contained in:
Pascal Langer
2020-09-21 10:50:01 +02:00
parent fedd04b724
commit df45a3ff83
3 changed files with 7 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
Protocols_Details.md
View File

@@ -556,6 +556,7 @@ You should definitively upgrade your receivers/sensors to the latest firmware ve
Model: OMPHOBBY M2 Heli, T720 RC Glider
Telemetry supported with A1=battery voltage (you need to adjust the offset with a voltmeter since there are some large differences between the models), RX_RSSI = TQly = percentage of received telemetry packets which has nothing to do with well the RX is receiving the TX but instead how well the TX=multi module is receiving the RX.
Telemetry is using the NRF24L01 RF component @250K so depending on your module it might not work well.
Option for this protocol corresponds to fine frequency tuning. This value is different for each Module and **must** be accurate otherwise the link will not be stable.
Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it.