gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-11 19:13:15 +00:00
Code Issues Projects Releases Wiki Activity

Add the Vantac MPM Lite Board (#173)

Browse Source
This commit is contained in:
Arne Schwabe
2018-06-25 10:28:37 +02:00
committed by pascallanger
parent add3fb13ef
commit dde5f6e119
5 changed files with 11 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
docs/Compiling_STM32.md
View File

@@ -37,12 +37,14 @@ The USB-TTL adapter can be either FTDI or CH340G, as long as it works. It shoul
The 4-pin header needs to be soldered onto the board as indicated by the red rectangle:
| **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Plus Module** |
|:---:|:---:|:---:|
| <img src="images/Board_PCB_STM32_with_serial.jpg" width="142" height="200"/> | <img src="images/bg-multi-stm32-serial.jpg" width="195" height="200"/> | <img src="images/irx4plus-serial.jpg" width="164" height="200"/> |
| **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Plus Module** | **MPM Lite** |
|:---:|:---:|:---:|:---:|
| <img src="images/Board_PCB_STM32_with_serial.jpg" width="142" height="200"/> | <img src="images/bg-multi-stm32-serial.jpg" width="195" height="200"/> | <img src="images/irx4plus-serial.jpg" width="164" height="200"/> | <img src="images/mpmlite-serial.jpg" width="200" height="189" />
**Note:** The Banggood STM32 module most likely already has the header pin in place.
**Note 2:** The Vantac MPM Lite module most likely already has the USB Bootloader flashed on it. You don't need these tools and can directly [upload via USB](#upload-via-usb) without flashing the USB bootloader first.
## Preparation
### Install the Arduino IDE
1. Download and install the Arduino IDE. The currently supported Arduino version is 1.8.5, available for [Windows]( https://www.arduino.cc/download_handler.php?f=/arduino-1.8.5-windows.exe), [Mac OSX](https://www.arduino.cc/download_handler.php?f=/arduino-1.8.5-macosx.zip) and [Linux (64-bit)](https://www.arduino.cc/download_handler.php?f=/arduino-1.8.5-linux64.tar.xz)
@@ -123,10 +125,10 @@ The bootloader only needs to be installed once unless you decide to switch from
In order to flash the bootloader the **BOOT0** jumper must be installed connecting **BOOT0** to 3.3V. The location of **BOOT0** varies by hardware module.
| **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Module** | **iRangeX IRX4 Plus Module**
|:---:|:---:|:---:|:---:|
| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. | Bridge the BOOT0 pin to the adjacent 3.3V pin as shown by the yellow jumper. |
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/> | <img src="images/irx4-boot0.jpg" height="200"/> | <img src="images/irx4plus-boot0.jpg" height="200"/> |
| **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Module** | **iRangeX IRX4 Plus Module** | **Vantac MPM Lite** |
|:---:|:---:|:---:|:---:|:---:|
| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. | Bridge the BOOT0 pin to the adjacent 3.3V pin as shown by the yellow jumper. | Brdige the two pins next to the usb port labelled with Boot0 |
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/> | <img src="images/irx4-boot0.jpg" height="200"/> | <img src="images/irx4plus-boot0.jpg" height="200"/> | <img src="images/mpmlite-boot0.jpg" width="200" /> |
1. If on Linux, ensure you have permissions to access serial interfaces as described in [Install the Maple USB drivers](#install-the-maple-usb-drivers)
1. Install the **BOOT0** jumper as described above