gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-09 22:38:10 +00:00
Code Issues Projects Releases Wiki Activity

typo error fix/cosmetics

Browse Source
This commit is contained in:
midelic 2017-03-31 14:14:08 +01:00 committed by GitHub
parent 86cee1e339
commit dd75c56404
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Compiling_STM32.md
View File

@ -47,8 +47,8 @@ Flashing precompiled **binaries** is done very simple with the cable setup prese
**usart_irq(&usart3_rb, USART3_BASE);**
**}
*/**
**}**
***/**
1. Run the IDE, and on the **Tools** menu, select **Board** and then **Boards manager**. Click on the Arduino DUE (32 Bits ARM-Cortex M3) from the list of available boards. You must do this step, it installs the arm-none-eabi-g++ toolchain!
@ -93,7 +93,7 @@ This method use USB connector on the STM32 V1.0 board or on the maple clone boar
1. Install first maple USB driver by running the batch file found in Arduino STM32 package folder "..\hardware\Arduino_STM32\drivers\win\install_drivers.bat"
1. Download the free STM32 flash loader demonstrator from [ST.com](http://www.st.com/en/development-tools/flasher-stm32.html) and using a USB-TTL device (like FTDI cable) flash the STM32duino bootloader available from Roger Clark's great STM32 site [here](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/tree/master/STM32F1/binaries) .Use bootloader **generic_boot20_pa1.bin**
1. Open Arduino IDE,browse to multiprotocol folder,load the sketch multiprotocol.ino.
1. In Arduino IDE under "Upload method" select **STM32duino**-bootloader.Wait until upload is complete.
1. In Arduino IDE under "Upload method" select **STM32duino**-bootloader.Click upload ,wait until upload is complete.
Notes:
- When you use multiSTM32_USB for the first time,the USB drivers are not recognized and port is not open/recognized(arduino IDE port selection is grey/unavailable). After this first time use, any subsequent update of the program, you'll have to select the correct serial port and upload sketches normally in Arduino using USB port.