gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-23 02:13:14 +00:00
Code Issues Projects Releases Wiki Activity

Hitec: new protocol

Browse Source 
Hitec protocol using the CC2500 RF component
Protocol number: 39
Sub protocols:
 - Optima (0): the TX must be really close to the RX for the bind negociation to complete.
- Minima (1): untested
Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
This commit is contained in:
Pascal Langer
2018-08-03 18:29:24 +02:00
parent 0b8ff15133
commit d9f343e20b
8 changed files with 409 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Multiprotocol/_Config.h
View File

@@ -99,6 +99,7 @@
//#define FORCE_FRSKYX_TUNING 0
//#define FORCE_SFHSS_TUNING 0
//#define FORCE_CORONA_TUNING 0
//#define FORCE_HITEC_TUNING 0
/** A7105 Fine Frequency Tuning **/
//This is required in rare cases where some A7105 modules and/or RXs have an inaccurate crystal oscillator.
@@ -163,6 +164,7 @@
#define FRSKYX_CC2500_INO
#define SFHSS_CC2500_INO
#define CORONA_CC2500_INO
#define HITEC_CC2500_INO
//The protocols below need a NRF24L01 to be installed
#define BAYANG_NRF24L01_INO
@@ -246,6 +248,8 @@
#define BAYANG_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define HUBSAN_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define CABELL_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define HITEC_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
//#define HITEC_FW_TELEMETRY // Forward received telemetry packet directly to TX to be decoded
//SPORT_POLLING is an implementation of the same polling routine as XJT module for sport telemetry bidirectional communication.
//This is useful for passing sport control frames from TX to RX(ex: changing Betaflight PID or VTX channels on the fly using LUA scripts with OpentX).
@@ -547,6 +551,9 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
FD_V3
PROTO_CFLIE
NONE
PROTO_HITEC
OPTIMA
MINIMA
*/
// RX_Num is used for TX & RX match. Using different RX_Num values for each receiver will prevent starting a model with the false config loaded...