gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:38:13 +00:00
Code Issues Projects Releases Wiki Activity

PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS

Browse Source
This commit is contained in:
pascallanger 2017-02-28 10:36:35 +01:00
parent 29a5397491
commit d7076f5295
5 changed files with 35 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 1
#define VERSION_REVISION 6
#define VERSION_PATCH_LEVEL 19
#define VERSION_PATCH_LEVEL 20
//******************
// Protocols
//******************

9
Multiprotocol/Multiprotocol.ino
View File

@ -478,6 +478,7 @@ uint8_t Update_All()
if(mode_select==MODE_SERIAL && IS_RX_FLAG_on) // Serial mode and something has been received
{
update_serial_data(); // Update protocol and data
update_channels_aux();
INPUT_SIGNAL_on; //valid signal received
last_signal=millis();
}
@ -485,7 +486,7 @@ uint8_t Update_All()
#ifdef ENABLE_PPM
if(mode_select!=MODE_SERIAL && IS_PPM_FLAG_on) // PPM mode and a full frame has been received
{
for(uint8_t i=0;i<NUM_CHN;i++)
for(uint8_t i=0;i<MAX_PPM_CHANNELS;i++)
{ // update servo data without interrupts to prevent bad read in protocols
uint16_t temp_ppm ;
cli(); // disable global int
@ -496,11 +497,11 @@ uint8_t Update_All()
Servo_data[i]= temp_ppm ;
}
PPM_FLAG_off; // wait for next frame before update
update_channels_aux();
INPUT_SIGNAL_on; //valid signal received
last_signal=millis();
}
#endif //ENABLE_PPM
update_channels_aux();
update_led_status();
#if defined(TELEMETRY)
#if ( !( defined(MULTI_TELEMETRY) || defined(MULTI_STATUS) ) )
@ -1222,7 +1223,7 @@ static uint32_t random_id(uint16_t adress, uint8_t create_new)
else
if(Cur_TCNT1>4840)
{ //start of frame
if(chan>3)
if(chan>=MIN_PPM_CHANNELS)
PPM_FLAG_on; // good frame received if at least 4 channels have been seen
chan=0; // reset channel counter
bad_frame=0;
@ -1231,7 +1232,7 @@ static uint32_t random_id(uint16_t adress, uint8_t create_new)
if(bad_frame==0) // need to wait for start of frame
{ //servo values between 500us and 2420us will end up here
PPM_data[chan]= Cur_TCNT1>>1;;
if(chan++>=NUM_CHN)
if(chan++>=MAX_PPM_CHANNELS)
bad_frame=1; // don't accept any new channels
}
Prev_TCNT1+=Cur_TCNT1;

8
Multiprotocol/TX_Def.h
View File

@ -38,6 +38,14 @@
#define PPM_MIN_125 1150 // 125%
#endif
// Walkera PL0811-01H
#if defined(TX_WALKERA)
#define PPM_MAX_100 1800 // 100%
#define PPM_MIN_100 1000 // 100%
#define PPM_MAX_125 1900 // 125%
#define PPM_MIN_125 900 // 125%
#endif
//Serial MIN MAX values
#define SERIAL_MAX_100 2012 // 100%
#define SERIAL_MIN_100 988 // 100%

13
Multiprotocol/Validate.h
View File

@ -129,3 +129,16 @@
#error BIND_CH must be below or equal to 16.
#endif
#endif
#if MIN_PPM_CHANNELS>16
#error MIN_PPM_CHANNELS must be below or equal to 16. The default for this value is 4.
#endif
#if MIN_PPM_CHANNELS<2
#error MIN_PPM_CHANNELS must be larger than 1. The default for this value is 4.
#endif
#if MAX_PPM_CHANNELS<MIN_PPM_CHANNELS
#error MAX_PPM_CHANNELS must be higher than MIN_PPM_CHANNELS. The default for this value is 16.
#endif
#if MAX_PPM_CHANNELS>16
#error MAX_PPM_CHANNELS must be below or equal to 16. The default for this value is 16.
#endif

8
Multiprotocol/_Config.h
View File

@ -177,6 +177,7 @@
//#define TX_SPEKTRUM //Spektrum (1100<->1900µs)
//#define TX_HISKY //HISKY (1120<->1920µs)
//#define TX_MPX //Multiplex MC2020 (1250<->1950µs)
//#define TX_WALKERA //Walkera PL0811-01H (1000<->1800µs)
//#define TX_CUSTOM //Custom
// The lines below are used to set the end points in microseconds (µs) if you have selected TX_CUSTOM.
@ -192,6 +193,13 @@
#define PPM_MIN_125 1000 // 125%
#endif
// The line below is used to set the minimum number of channels which the module should receive to consider a PPM frame valid.
// The default value is 4 to receive at least AETR for flying models but you could also connect the PPM from a car radio which has only 3 channels by changing this number to 3.
#define MIN_PPM_CHANNELS 4
// The line below is used to set the maximum number of channels which the module should work with. Any channels received above this number are discarded.
// The default value is 16 to receive all possible channels but you might want to filter some "bad" channels from the PPM frame like the ones above 6 on the Walkera PL0811.
#define MAX_PPM_CHANNELS 16
//The table below indicates which protocol to run when a specific position on the dial has been selected.
//All fields and values are explained below. Everything is configurable from here like in the Serial mode.
//Example: You can associate multiple times the same protocol to different dial positions to take advantage of the model match (RX_Num)