gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-30 08:43:16 +00:00
Code Issues Projects Releases Wiki Activity

PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS

Browse Source
This commit is contained in:
pascallanger
2017-02-28 10:36:35 +01:00
parent 29a5397491
commit d7076f5295
5 changed files with 35 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Multiprotocol/_Config.h
View File

@@ -177,6 +177,7 @@
//#define TX_SPEKTRUM //Spektrum (1100<->1900µs)
//#define TX_HISKY //HISKY (1120<->1920µs)
//#define TX_MPX //Multiplex MC2020 (1250<->1950µs)
//#define TX_WALKERA //Walkera PL0811-01H (1000<->1800µs)
//#define TX_CUSTOM //Custom
// The lines below are used to set the end points in microseconds (µs) if you have selected TX_CUSTOM.
@@ -192,6 +193,13 @@
#define PPM_MIN_125 1000 // 125%
#endif
// The line below is used to set the minimum number of channels which the module should receive to consider a PPM frame valid.
// The default value is 4 to receive at least AETR for flying models but you could also connect the PPM from a car radio which has only 3 channels by changing this number to 3.
#define MIN_PPM_CHANNELS 4
// The line below is used to set the maximum number of channels which the module should work with. Any channels received above this number are discarded.
// The default value is 16 to receive all possible channels but you might want to filter some "bad" channels from the PPM frame like the ones above 6 on the Walkera PL0811.
#define MAX_PPM_CHANNELS 16
//The table below indicates which protocol to run when a specific position on the dial has been selected.
//All fields and values are explained below. Everything is configurable from here like in the Serial mode.
//Example: You can associate multiple times the same protocol to different dial positions to take advantage of the model match (RX_Num)