Update Compiling_STM32.md

This commit is contained in:
gerrievanzyl 2016-10-04 13:04:07 -04:00 committed by GitHub
parent d122d39d3a
commit d66e782152

View File

@ -133,6 +133,7 @@ The key difference of this method is that the 3.3V FTDI cable must also provide
###Flashing binary file: ###Flashing binary file:
If you want to flash a pre-compiled binary file (like the Release .bin files) you need specialized software and the FTDI cable. If you want to flash a pre-compiled binary file (like the Release .bin files) you need specialized software and the FTDI cable.
1. Set BOOT0 jumper 1. Set BOOT0 jumper
1. Connect your 3.3V FTDI cable (USB - TTL serial) to Multiprotocol serial port (RX,TX,GND,5V) 1. Connect your 3.3V FTDI cable (USB - TTL serial) to Multiprotocol serial port (RX,TX,GND,5V)
1. The other steps regarding power supply the same as previous recommandation regarding jumpers 1. The other steps regarding power supply the same as previous recommandation regarding jumpers
@ -151,6 +152,7 @@ To be checked.
###Report issues for the STM32 board ###Report issues for the STM32 board
You can report your problem using the [GitHub issue](https://github.com/midelic/DIY-Multiprotocol-TX-Module/issues) system or go to the [Main thread on RCGROUPS](http://www.rcgroups.com/forums/showthread.php?t=2165676) to ask your question. You can report your problem using the [GitHub issue](https://github.com/midelic/DIY-Multiprotocol-TX-Module/issues) system or go to the [Main thread on RCGROUPS](http://www.rcgroups.com/forums/showthread.php?t=2165676) to ask your question.
Please provide the following information: Please provide the following information:
- Multiprotocol code version - Multiprotocol code version
- STM32 version - STM32 version
- TX type - TX type