gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-28 16:23:15 +00:00
Code Issues Projects Releases Wiki Activity

NRF init changed to most likely default

Browse Source
This commit is contained in:
Pascal Langer
2021-02-11 18:40:29 +01:00
parent b41dccef67
commit d66bf1a5b3
41 changed files with 101 additions and 533 deletions
Download Patch File Download Diff File Expand all files Collapse all files

34
Multiprotocol/CABELL_nrf224l01.ino
View File

@@ -255,7 +255,7 @@ static void __attribute__((unused)) CABELL_send_packet(uint8_t bindMode)
*p |= (packet_count++)<<7; // This causes the 8th bit of the first byte to toggle with each xmit so consecutive payloads are not identical.
// This is a work around for a reported bug in clone NRF24L01 chips that mis-took this case for a re-transmit of the same packet.
CABELL_SetPower();
NRF24L01_SetPower();
NRF24L01_WritePayload((uint8_t*)&TxPacket, packetSize);
#if defined CABELL_HUB_TELEMETRY
@@ -359,45 +359,15 @@ static void __attribute__((unused)) CABELL_setAddress()
static void __attribute__((unused)) CABELL_RF_init()
{
NRF24L01_Initialize();
CABELL_SetPower();
NRF24L01_SetBitrate(NRF24L01_BR_250K); // slower data rate gives better range/reliability
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknowledgment on all data pipes
NRF24L01_SetTxRxMode(TX_EN); //Power up and 16 bit CRC
CABELL_setAddress();
NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70);
NRF24L01_FlushTx();
NRF24L01_FlushRx();
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01);
NRF24L01_WriteReg(NRF24L01_11_RX_PW_P0, 0x20); // 32 byte packet length
NRF24L01_WriteReg(NRF24L01_12_RX_PW_P1, 0x20); // 32 byte packet length
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03);
NRF24L01_WriteReg(NRF24L01_04_SETUP_RETR, 0x5F); // no retransmits
NRF24L01_Activate(0x73); // Activate feature register
NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 0x3F); // Enable dynamic payload length on all pipes
NRF24L01_WriteReg(NRF24L01_1D_FEATURE, 0x04); // Enable dynamic Payload Length
NRF24L01_Activate(0x73);
prev_power = NRF_POWER_0;
}
//-----------------------------------------------------------------------------------------
static void CABELL_SetPower() // This over-ride the standard Set Power to allow an flag in option to indicate max power setting
// Note that on many modules max power may actually be worse than the normal high power setting
// test and only use max if it helps the range
{
if(IS_BIND_DONE && !IS_RANGE_FLAG_on && ((option & CABELL_OPTION_MASK_MAX_POWER_OVERRIDE) != 0))
{ // If we are not in range or bind mode and power setting override is in effect, then set max power, else standard power logic
if(prev_power != NRF_POWER_3) // prev_power is global variable for NRF24L01; NRF_POWER_3 is max power
{
uint8_t rf_setup = NRF24L01_ReadReg(NRF24L01_06_RF_SETUP);
rf_setup = (rf_setup & 0xF9) | (NRF_POWER_3 << 1);
NRF24L01_WriteReg(NRF24L01_06_RF_SETUP, rf_setup);
prev_power=NRF_POWER_3;
}
}
else
NRF24L01_SetPower();
}
//-----------------------------------------------------------------------------------------