gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-09 22:28:12 +00:00
Code Issues Projects Releases Wiki Activity

Multi_sync updates

Browse Source 
Only for STM32
Enable bidirectionnal serial
This commit is contained in:
pascallanger 2019-10-11 01:14:04 +02:00
parent cd7ede006c
commit d434e63c22
3 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Multiprotocol/Multiprotocol.ino
View File

@ -2027,13 +2027,13 @@ static uint32_t random_id(uint16_t address, uint8_t create_new)
if((rx_buff[0]&0xFE)==0x54) // If 1st byte is 0x54 or 0x55 it looks ok
#endif
{
TX_RX_PAUSE_on;
tx_pause();
#if defined STM32_BOARD
TIMER2_BASE->CCR2=TIMER2_BASE->CNT + 300; // Next byte should show up within 15us=1.5 byte
TIMER2_BASE->SR = 0x1E5F & ~TIMER_SR_CC2IF; // Clear Timer2/Comp2 interrupt flag
TIMER2_BASE->DIER |= TIMER_DIER_CC2IE; // Enable Timer2/Comp2 interrupt
#else
TX_RX_PAUSE_on;
tx_pause();
cli(); // Disable global int due to RW of 16 bits registers
OCR1B = TCNT1 + 300; // Next byte should show up within 15us=1.5 byte
sei(); // Enable global int
@ -2076,9 +2076,9 @@ static uint32_t random_id(uint16_t address, uint8_t create_new)
TIMER2_BASE->DIER &= ~TIMER_DIER_CC2IE; // Disable Timer2/Comp2 interrupt
#else
CLR_TIMSK1_OCIE1B; // Disable interrupt on compare B match
TX_RX_PAUSE_off;
tx_resume();
#endif
TX_RX_PAUSE_off;
tx_resume();
}
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
cli() ;
@ -2117,9 +2117,9 @@ static uint32_t random_id(uint16_t address, uint8_t create_new)
TIMER2_BASE->DIER &= ~TIMER_DIER_CC2IE; // Disable Timer2/Comp2 interrupt
#else
CLR_TIMSK1_OCIE1B; // Disable interrupt on compare B match
TX_RX_PAUSE_off;
tx_resume();
#endif
TX_RX_PAUSE_off;
tx_resume();
}
#endif //ENABLE_SERIAL

2
Multiprotocol/Validate.h
View File

@ -319,7 +319,7 @@
#define SPORT_SEND
#endif
#if not defined(MULTI_TELEMETRY)
#if not defined(MULTI_TELEMETRY) || not defined(STM32_BOARD)
#undef MULTI_SYNC
#endif

4
Multiprotocol/_Config.h
View File

@ -268,10 +268,10 @@
//Use with er9x/erksy9x, for OpenTX MULTI_TELEMETRY below is preferred instead
//#define MULTI_STATUS
//Comment to send Multi status and allow OpenTX to autodetect the telemetry format
//Sends Multi status and allow OpenTX to autodetect the telemetry format. Comment to disable.
//Supported by OpenTX version 2.2 RC9 and newer. NOT supported by er9x/ersky9x use MULTI_STATUS instead.
#define MULTI_TELEMETRY
//Comment to not sync OpenTX and module together
//Sync OpenTX frames with the current protocol timing. This feature is only available on the STM32 module. Comment to disable.
#define MULTI_SYNC
//Comment a line to disable a specific protocol telemetry