gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 17:58:13 +00:00
Code Issues Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
pascallanger 2015-12-28 17:53:56 +01:00
parent 6f94409fe1
commit d26e211b59
1 changed files with 48 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
README.md
View File

@ -19,6 +19,8 @@ The protocol selection is done via a dip switch or a rotary dip switch for acces
###Using a serial output
The multiprotocol TX module can be used on a Turnigy 9X, 9XR, 9XR Pro, Taranis, ... running er9x or ersky9X. (A version for OpenTX is being looked at)
Using this solution does not need any modification of the TX since it uses the TX module slot PPM pin for serial transfer.
Channels order is AETR by default but can be changed in the source code.
This enables full integration using the radio GUI to setup models with all the available protocols options.
@ -26,13 +28,23 @@ This enables full integration using the radio GUI to setup models with all the a
![Screenshot](http://static.rcgroups.net/forums/attachments/1/1/5/4/3/7/t8520065-194-thumb-IMG_20151217_002215%20%28Medium%29.jpg?d=1450308588)
Options are:
- Protocol and type: many main protocols have variants
- RX Num: number your different RXs and make sure only one model will react to the commands
- Power: High or low, enables to lower the power setting of your TX (indoor for example).
- Option: -127..+127 allowing to set specific protocol options. Like for Hubsan to set the video frequency.
- Bind: bind a RX/model
- Autobind: Yes or No. At the model selection (or power applied to the TX) a bind sequence will be initiated
- Range: test range by setting the transmission power to the lowest value
- Protocol and type: many main protocols have variants
- RX Num: number your different RXs and make sure only one model will react to the commands
- Power: High or low, enables to lower the power setting of your TX (indoor for example).
- Option: -127..+127 allowing to set specific protocol options. Like for Hubsan to set the video frequency.
- Bind: bind a RX/model
- Autobind: Yes or No. At the model selection (or power applied to the TX) a bind sequence will be initiated
- Range: test range by setting the transmission power to the lowest value
Note:
- there is 2 versions of serial protocol either 8 or 16 channels. 16 channels is the latest version. Make sure to use the right version based on your version of er9x/ersky9x.
###Telemetry
Telemetry is available for er9x and ersky9x TX.
There are only 2 protocols so far supporting telemetry: Hubsan and Frsky.
To enable telemetry on Turnigy 9X or 9XR you need to modify your TX following one of the Frsky mod like this [one](http://blog.oscarliang.net/turnigy-9x-advance-mod/).
##Protocols
@ -111,6 +123,35 @@ Bayang||NRF24L01
Note:
- The dial should be set to 0 for serial which means all protocol selection pins should be left unconnected
###Protocol channels
####SLT
All channels -100%..+100%
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|GEAR|PITCH
####Symax
All channels -100%..+100%
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|FLIP||PICTURE|VIDEO|HEADLESS
####V2X2
All channels -100%..+100%
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|FLIP|LIGHT|PICTURE|VIDEO|HEADLESS|MAG_CAL_X|MAG_CAL_Y
####YD717
All channels -100%..+100%
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|FLIP|LIGHT|PICTURE|VIDEO|HEADLESS
##Hardware
###RF modules