gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:48:11 +00:00
Code Issues Projects Releases Wiki Activity

hex file location under Release

Browse Source
This commit is contained in:
pascallanger 2016-01-01 22:54:43 +01:00
parent fdf6cc9912
commit d01d6f8fd6
1 changed files with 15 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
README.md
View File

@ -5,6 +5,8 @@ Multiprotocol is a TX module which enables any TX to control lot of different mo
![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952733-114-thumb-P4100002.JPG?d=1433910155) ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952734-189-thumb-P4100003.JPG?d=1433910159) ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952733-114-thumb-P4100002.JPG?d=1433910155) ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952734-189-thumb-P4100003.JPG?d=1433910159)
If you are looking at downloading the latest compiled version (hex file), it's under [Release](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases) on the top menu.
##Contents ##Contents
[Compatible TX](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#compatible-tx) [Compatible TX](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#compatible-tx)
@ -13,7 +15,7 @@ Multiprotocol is a TX module which enables any TX to control lot of different mo
[Hardware](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#hardware) [Hardware](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#hardware)
[Compilation](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#compilation) [Compilation and programmation](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#compilation)
[Troubleshooting](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#troubleshooting) [Troubleshooting](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#troubleshooting)
@ -327,7 +329,7 @@ You can 3D print your box (details [here](http://www.rcgroups.com/forums/showpos
![Screenshot](http://static.rcgroups.net/forums/attachments/1/1/5/4/3/7/t8462144-54-thumb-Multi_case_9XR.jpg?d=1448575289) ![Screenshot](http://static.rcgroups.net/forums/attachments/1/1/5/4/3/7/t8462144-54-thumb-Multi_case_9XR.jpg?d=1448575289)
![Screenshot](http://static.rcgroups.net/forums/attachments/1/1/5/4/3/7/t8462145-106-thumb-Multi_case_v1.jpg?d=1448575293) ![Screenshot](http://static.rcgroups.net/forums/attachments/1/1/5/4/3/7/t8462145-106-thumb-Multi_case_v1.jpg?d=1448575293)
##Compilation ##Compilation and programmation
###Toolchain ###Toolchain
Arduino 1.6.5 Arduino 1.6.5
@ -341,6 +343,8 @@ It is recommended to use an external programmer like [USBASP](http://www.banggoo
From the Arduino environment, you can use this shortcut to compile and upload to the module: Skecth->Upload Using Programmer (Ctrl+Maj+U) From the Arduino environment, you can use this shortcut to compile and upload to the module: Skecth->Upload Using Programmer (Ctrl+Maj+U)
To flash the latest provided hex file under [Release](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases), you can use a tool like [AVR Burn-O-Mat](http://avr8-burn-o-mat.aaabbb.de/), set the microcontroller to m328p and flash it.
###Set fuses ###Set fuses
Use a tool like [AVR Burn-O-Mat](http://avr8-burn-o-mat.aaabbb.de/) to set the fuses of the Atmega328 to: Use a tool like [AVR Burn-O-Mat](http://avr8-burn-o-mat.aaabbb.de/) to set the fuses of the Atmega328 to:
- Low Fuse 0xFF - Low Fuse 0xFF
@ -365,3 +369,12 @@ For serial, the preffered method is to bind via the GUI protocol page.
For serial, leave all 4 selection pins unconnected. For serial, leave all 4 selection pins unconnected.
For PPM, connect 1 to 4 of the selection protocol pins to GND. For PPM, connect 1 to 4 of the selection protocol pins to GND.
The protocol/mode selection must be done before the power is applied. The protocol/mode selection must be done before the power is applied.
###Report issues
You can report your problem using the [GitHub issue](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues) system or go to the [Main thread on RCGROUPS](http://www.rcgroups.com/forums/showthread.php?t=2165676) to ask your question.
Please provide the following information:
- Multiprotocol code version
- TX type
- Using PPM or Serial, if using er9x or ersky9x the version in use
- Different led status (multimodule and model)
- Explanation of the behavior and reproduction steps