gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 19:48:11 +00:00
Code Issues Projects Releases Wiki Activity

Code cleanup

Browse Source
This commit is contained in:
pascallanger 2016-09-21 14:28:37 +02:00
parent 73aab88109
commit cfcd6e5f93
24 changed files with 585 additions and 515 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
Multiprotocol/A7105_SPI.ino
View File

@ -12,12 +12,9 @@
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
//-------------------------------
//-------------------------------
//A7105 SPI routines
//-------------------------------
//-------------------------------
/********************/
/** A7105 routines **/
/********************/
#include "iface_a7105.h"
void A7105_WriteData(uint8_t len, uint8_t channel)
@ -39,7 +36,7 @@ void A7105_ReadData() {
A7105_CSN_off;
SPI_Write(0x45);
for (i=0;i<16;i++)
packet[i]=A7105_Read();
packet[i]=SPI_SDIO_Read();
A7105_CSN_on;
}
@ -55,28 +52,11 @@ uint8_t A7105_ReadReg(uint8_t address) {
uint8_t result;
A7105_CSN_off;
SPI_Write(address |=0x40); //bit 6 =1 for reading
result = A7105_Read();
result = SPI_SDIO_Read();
A7105_CSN_on;
return(result);
}
uint8_t A7105_Read(void)
{
uint8_t result=0;
SDI_input;
for(uint8_t i=0;i<8;i++)
{
result=result<<1;
if(SDI_1) ///if SDIO =1
result |= 0x01;
SCLK_on;
NOP();
SCLK_off;
}
SDI_output;
return result;
}
//------------------------
void A7105_SetTxRxMode(uint8_t mode)
{

2
Multiprotocol/ASSAN_nrf24l01.ino
View File

@ -75,7 +75,7 @@ uint16_t ASSAN_callback()
phase++;
case ASSAN_BIND1:
//Wait for receiver to send the frames
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & BV(NRF24L01_07_RX_DR))
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
{ //Something has been received
NRF24L01_ReadPayload(packet, ASSAN_PACKET_SIZE);
if(packet[19]==0x13)

133
Multiprotocol/Arduino.ino Normal file
View File

@ -0,0 +1,133 @@
/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
/************************************/
/** Arduino replacement routines **/
/************************************/
// replacement millis() and micros()
// These work polled, no interrupts
// micros() MUST be called at least once every 32 milliseconds
uint16_t MillisPrecount ;
uint16_t lastTimerValue ;
uint32_t TotalMicros ;
uint32_t TotalMillis ;
uint8_t Correction ;
uint32_t micros()
{
uint16_t elapsed ;
uint8_t millisToAdd ;
uint8_t oldSREG = SREG ;
cli() ;
uint16_t time = TCNT1 ; // Read timer 1
SREG = oldSREG ;
elapsed = time - lastTimerValue ;
elapsed += Correction ;
Correction = elapsed & 0x01 ;
elapsed >>= 1 ;
uint32_t ltime = TotalMicros ;
ltime += elapsed ;
cli() ;
TotalMicros = ltime ; // Done this way for RPM to work correctly
lastTimerValue = time ;
SREG = oldSREG ; // Still valid from above
elapsed += MillisPrecount;
millisToAdd = 0 ;
if ( elapsed > 15999 )
{
millisToAdd = 16 ;
elapsed -= 16000 ;
}
if ( elapsed > 7999 )
{
millisToAdd += 8 ;
elapsed -= 8000 ;
}
if ( elapsed > 3999 )
{
millisToAdd += 4 ;
elapsed -= 4000 ;
}
if ( elapsed > 1999 )
{
millisToAdd += 2 ;
elapsed -= 2000 ;
}
if ( elapsed > 999 )
{
millisToAdd += 1 ;
elapsed -= 1000 ;
}
TotalMillis += millisToAdd ;
MillisPrecount = elapsed ;
return TotalMicros ;
}
uint32_t millis()
{
micros() ;
return TotalMillis ;
}
void delayMilliseconds(unsigned long ms)
{
uint16_t start = (uint16_t)micros();
uint16_t lms = ms ;
while (lms > 0) {
if (((uint16_t)micros() - start) >= 1000) {
lms--;
start += 1000;
}
}
}
/* Important notes:
- Max value is 16000µs
- delay is not accurate due to interrupts happening */
void delayMicroseconds(unsigned int us)
{
if (--us == 0)
return;
us <<= 2; // * 4
us -= 2; // - 2
#ifdef XMEGA
__asm__ __volatile__ (
"1: sbiw %0,1" "\n\t" // 2 cycles
"nop \n"
"nop \n"
"nop \n"
"nop \n"
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
);
#else
__asm__ __volatile__ (
"1: sbiw %0,1" "\n\t" // 2 cycles
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
);
#endif
}
#ifndef XMEGA
void init()
{
// this needs to be called before setup() or some functions won't work there
sei();
}
#endif //XMEGA

2
Multiprotocol/Bayang_nrf24l01.ino
View File

@ -99,7 +99,7 @@ static void __attribute__((unused)) BAYANG_send_packet(uint8_t bind)
// Power on, TX mode, 2byte CRC
// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
XN297_Configure(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP));
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? BAYANG_RF_BIND_CHANNEL:hopping_frequency[hopping_frequency_no++]);
hopping_frequency_no%=BAYANG_RF_NUM_CHANNELS;

2
Multiprotocol/CG023_nrf24l01.ino
View File

@ -171,7 +171,7 @@ static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
// Power on, TX mode, 2byte CRC
// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
XN297_Configure(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP));
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
if (bind)
NRF24L01_WriteReg(NRF24L01_05_RF_CH, sub_protocol==H8_3D?hopping_frequency[0]:CG023_RF_BIND_CHANNEL);
else

6
Multiprotocol/CX10_nrf24l01.ino
View File

@ -148,7 +148,7 @@ static void __attribute__((unused)) CX10_Write_Packet(uint8_t bind)
// Power on, TX mode, 2byte CRC
// Why CRC0? xn297 does not interpret it - either 16-bit CRC or nothing
XN297_Configure(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP));
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
if (bind)
NRF24L01_WriteReg(NRF24L01_05_RF_CH, CX10_RF_BIND_CHANNEL);
else
@ -197,7 +197,7 @@ uint16_t CX10_callback()
}
break;
case CX10_BIND2:
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & BV(NRF24L01_07_RX_DR))
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
{ // RX fifo data ready
XN297_ReadPayload(packet, packet_length);
NRF24L01_SetTxRxMode(TXRX_OFF);
@ -220,7 +220,7 @@ uint16_t CX10_callback()
NRF24L01_SetTxRxMode(TXRX_OFF);
NRF24L01_FlushRx();
NRF24L01_SetTxRxMode(RX_EN);
XN297_Configure(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP) | BV(NRF24L01_00_PRIM_RX));
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP) | _BV(NRF24L01_00_PRIM_RX));
}
break;
case CX10_DATA:

79
Multiprotocol/Convert.ino Normal file
View File

@ -0,0 +1,79 @@
/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
/************************/
/** Convert routines **/
/************************/
int16_t map( int16_t x, int16_t in_min, int16_t in_max, int16_t out_min, int16_t out_max)
{
// return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
long y ;
x -= in_min ;
y = out_max - out_min ;
y *= x ;
x = y / (in_max - in_min) ;
return x + out_min ;
}
// Channel value is converted to 8bit values full scale
uint8_t convert_channel_8b(uint8_t num)
{
return (uint8_t) (map(limit_channel_100(num),servo_min_100,servo_max_100,0,255));
}
// Channel value is converted to 8bit values to provided values scale
uint8_t convert_channel_8b_scale(uint8_t num,uint8_t min,uint8_t max)
{
return (uint8_t) (map(limit_channel_100(num),servo_min_100,servo_max_100,min,max));
}
// Channel value is converted sign + magnitude 8bit values
uint8_t convert_channel_s8b(uint8_t num)
{
uint8_t ch;
ch = convert_channel_8b(num);
return (ch < 128 ? 127-ch : ch);
}
// Channel value is converted to 10bit values
uint16_t convert_channel_10b(uint8_t num)
{
return (uint16_t) (map(limit_channel_100(num),servo_min_100,servo_max_100,1,1023));
}
// Channel value is multiplied by 1.5
uint16_t convert_channel_frsky(uint8_t num)
{
return Servo_data[num] + Servo_data[num]/2;
}
// Channel value is converted for HK310
void convert_channel_HK310(uint8_t num, uint8_t *low, uint8_t *high)
{
uint16_t temp=0xFFFF-(4*Servo_data[num])/3;
*low=(uint8_t)(temp&0xFF);
*high=(uint8_t)(temp>>8);
}
// Channel value is limited to PPM_100
uint16_t limit_channel_100(uint8_t ch)
{
if(Servo_data[ch]>servo_max_100)
return servo_max_100;
else
if (Servo_data[ch]<servo_min_100)
return servo_min_100;
return Servo_data[ch];
}

2
Multiprotocol/ESky_nrf24l01.ino
View File

@ -35,7 +35,7 @@ static void __attribute__((unused)) ESKY_init(uint8_t bind)
NRF24L01_Initialize();
// 2-bytes CRC, radio off
NRF24L01_WriteReg(NRF24L01_00_CONFIG, BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknowledgement
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01); // Enable data pipe 0
if (bind)

4
Multiprotocol/FY326_nrf24l01.ino
View File

@ -105,7 +105,7 @@ uint16_t FY326_callback()
switch (phase)
{
case FY326_BIND1:
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & BV(NRF24L01_07_RX_DR))
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
{ // RX fifo data ready
NRF24L01_ReadPayload(packet, FY326_PACKET_SIZE);
rxid = packet[13];
@ -127,7 +127,7 @@ uint16_t FY326_callback()
}
break;
case FY326_BIND2:
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & BV(NRF24L01_07_TX_DS))
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_TX_DS))
{ // TX data sent -> switch to RX mode
NRF24L01_SetTxRxMode(TXRX_OFF);
NRF24L01_FlushRx();

2
Multiprotocol/Hontai_nrf24l01.ino
View File

@ -121,7 +121,7 @@ static void __attribute__((unused)) HONTAI_send_packet(uint8_t bind)
if(sub_protocol == FORMAT_JJRCX1)
NRF24L01_SetTxRxMode(TX_EN);
else
XN297_Configure(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP));
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
NRF24L01_WriteReg(NRF24L01_05_RF_CH, bind ? HONTAI_RF_BIND_CHANNEL : hopping_frequency[hopping_frequency_no++]);
hopping_frequency_no %= 3;

4
Multiprotocol/KN_nrf24l01.ino
View File

@ -246,7 +246,7 @@ static void __attribute__((unused)) kn_init()
NRF24L01_Initialize();
NRF24L01_WriteReg(NRF24L01_00_CONFIG, BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknoledgement
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01); // Enable data pipe 0
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03); // 5-byte RX/TX address
@ -259,7 +259,7 @@ static void __attribute__((unused)) kn_init()
NRF24L01_Activate(0x73);
NRF24L01_WriteReg(NRF24L01_1C_DYNPD, 1); // Dynamic payload for data pipe 0
// Enable: Dynamic Payload Length to enable PCF
NRF24L01_WriteReg(NRF24L01_1D_FEATURE, BV(NRF2401_1D_EN_DPL));
NRF24L01_WriteReg(NRF24L01_1D_FEATURE, _BV(NRF2401_1D_EN_DPL));
NRF24L01_SetPower();

2
Multiprotocol/MJXQ_nrf24l01.ino
View File

@ -142,7 +142,7 @@ static void __attribute__((unused)) MJXQ_send_packet(uint8_t bind)
if (sub_protocol == H26D)
NRF24L01_SetTxRxMode(TX_EN);
else
XN297_Configure(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP));
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
NRF24L01_WriteReg(NRF24L01_05_RF_CH, hopping_frequency[hopping_frequency_no++ / 2]);
hopping_frequency_no %= 2 * MJXQ_RF_NUM_CHANNELS; // channels repeated

2
Multiprotocol/MT99xx_nrf24l01.ino
View File

@ -169,7 +169,7 @@ static void __attribute__((unused)) MT99XX_init()
NRF24L01_SetBitrate(NRF24L01_BR_1M); // 1Mbps
NRF24L01_SetPower();
XN297_Configure(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP) );
XN297_Configure(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP) );
}

255
Multiprotocol/Multiprotocol.h
View File

@ -15,12 +15,12 @@
// Check selected board type
#ifndef XMEGA
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO)
#error You must select the board type "Arduino Pro or Pro Mini" or "Arduino Mini"
#endif
#if F_CPU != 16000000L || not defined(__AVR_ATmega328P__)
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO)
#error You must select the board type "Arduino Pro or Pro Mini" or "Arduino Mini"
#endif
#if F_CPU != 16000000L || not defined(__AVR_ATmega328P__)
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#endif
//******************
@ -156,6 +156,9 @@ struct PPM_Parameters
uint8_t option;
};
// Macros
#define NOP() __asm__ __volatile__("nop")
//*******************
//*** Timer ***
//*******************
@ -177,207 +180,15 @@ struct PPM_Parameters
#define CLR_TIMSK1_OCIE1B TIMSK1 &=~_BV(OCIE1B)
#endif
//*******************
//*** Pinouts ***
//*******************
// TX
#define SERIAL_TX_pin 1 //PD1
#define SERIAL_TX_port PORTD
#define SERIAL_TX_ddr DDRD
#define SERIAL_TX_output SERIAL_TX_ddr |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_on SERIAL_TX_port |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_off SERIAL_TX_port &= ~_BV(SERIAL_TX_pin)
#ifdef DEBUG_TX
#define DEBUG_TX_on SERIAL_TX_ON
#define DEBUG_TX_off SERIAL_TX_OFF
#define DEBUG_TX_toggle SERIAL_TX_port ^= _BV(SERIAL_TX_pin)
#else
#define DEBUG_TX_on
#define DEBUG_TX_off
#define DEBUG_TX_toggle
#endif
// Dial
#define MODE_DIAL1_pin 2
#define MODE_DIAL1_port PORTB
#define MODE_DIAL1_ipr PINB
#define MODE_DIAL2_pin 3
#define MODE_DIAL2_port PORTB
#define MODE_DIAL2_ipr PINB
#define MODE_DIAL3_pin 4
#define MODE_DIAL3_port PORTB
#define MODE_DIAL3_ipr PINB
#define MODE_DIAL4_pin 0
#define MODE_DIAL4_port PORTC
#define MODE_DIAL4_ipr PINC
// PPM
#define PPM_pin 3 //D3 = PD3
#define PPM_port PORTD
// SDIO
#define SDI_pin 5 //D5 = PD5
#define SDI_port PORTD
#define SDI_ipr PIND
#define SDI_ddr DDRD
#ifdef XMEGA
#define SDI_on SDI_port.OUTSET = _BV(SDI_pin)
#define SDI_off SDI_port.OUTCLR = _BV(SDI_pin)
#else
#define SDI_on SDI_port |= _BV(SDI_pin)
#define SDI_off SDI_port &= ~_BV(SDI_pin)
#define SDI_1 (SDI_ipr & _BV(SDI_pin))
#define SDI_0 (SDI_ipr & _BV(SDI_pin)) == 0x00
#endif
#define SDI_input SDI_ddr &= ~_BV(SDI_pin)
#define SDI_output SDI_ddr |= _BV(SDI_pin)
//SDO
#define SDO_pin 6 //D6 = PD6
#define SDO_port PORTD
#define SDO_ipr PIND
#ifdef XMEGA
#define SDO_1 (SDO_port.IN & _BV(SDO_pin))
#define SDO_0 (SDO_port.IN & _BV(SDO_pin)) == 0x00
#else
#define SDO_1 (SDO_ipr & _BV(SDO_pin))
#define SDO_0 (SDO_ipr & _BV(SDO_pin)) == 0x00
#endif
// SCLK
#define SCLK_port PORTD
#define SCLK_ddr DDRD
#ifdef XMEGA
#define SCLK_pin 7 //PD7
#define SCLK_on SCLK_port.OUTSET = _BV(SCLK_pin)
#define SCLK_off SCLK_port.OUTCLR = _BV(SCLK_pin)
#else
#define SCLK_pin 4 //D4 = PD4
#define SCLK_output SCLK_ddr |= _BV(SCLK_pin)
#define SCLK_on SCLK_port |= _BV(SCLK_pin)
#define SCLK_off SCLK_port &= ~_BV(SCLK_pin)
#endif
// A7105
#define A7105_CSN_pin 2 //D2 = PD2
#define A7105_CSN_port PORTD
#define A7105_CSN_ddr DDRD
#define A7105_CSN_output A7105_CSN_ddr |= _BV(A7105_CSN_pin)
#define A7105_CSN_on A7105_CSN_port |= _BV(A7105_CSN_pin)
#define A7105_CSN_off A7105_CSN_port &= ~_BV(A7105_CSN_pin)
// CC2500
#define CC25_CSN_pin 7 //D7 = PD7
#define CC25_CSN_port PORTD
#define CC25_CSN_ddr DDRD
#define CC25_CSN_output CC25_CSN_ddr |= _BV(CC25_CSN_pin)
#define CC25_CSN_on CC25_CSN_port |= _BV(CC25_CSN_pin)
#define CC25_CSN_off CC25_CSN_port &= ~_BV(CC25_CSN_pin)
// NRF24L01
#define NRF_CSN_pin 0 //D8 = PB0
#define NRF_CSN_port PORTB
#define NRF_CSN_ddr DDRB
#define NRF_CSN_output NRF_CSN_ddr |= _BV(NRF_CSN_pin)
#define NRF_CSN_on NRF_CSN_port |= _BV(NRF_CSN_pin)
#define NRF_CSN_off NRF_CSN_port &= ~_BV(NRF_CSN_pin)
#define NRF_CE_on
#define NRF_CE_off
// CYRF6936
#ifdef XMEGA
#define CYRF_CSN_pin 4 //PD4
#define CYRF_CSN_port PORTD
#define CYRF_CSN_ddr DDRD
#define CYRF_CSN_on CYRF_CSN_port.OUTSET = _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port.OUTCLR = _BV(CYRF_CSN_pin)
#else
#define CYRF_CSN_pin 1 //D9 = PB1
#define CYRF_CSN_port PORTB
#define CYRF_CSN_ddr DDRB
#define CYRF_CSN_output CYRF_CSN_ddr |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_on CYRF_CSN_port |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port &= ~_BV(CYRF_CSN_pin)
#define CYRF_RST_pin 5 //A5 = PC5
#define CYRF_RST_port PORTC
#define CYRF_RST_ddr DDRC
#define CYRF_RST_output CYRF_RST_ddr |= _BV(CYRF_RST_pin)
#define CYRF_RST_HI CYRF_RST_port |= _BV(CYRF_RST_pin)
#define CYRF_RST_LO CYRF_RST_port &= ~_BV(CYRF_RST_pin)
#endif
//RF Switch
#ifdef XMEGA
#define PE1_on
#define PE1_off
#define PE2_on
#define PE2_off
#else
#define PE1_pin 1 //A1 = PC1
#define PE1_port PORTC
#define PE1_ddr DDRC
#define PE1_output PE1_ddr |= _BV(PE1_pin)
#define PE1_on PE1_port |= _BV(PE1_pin)
#define PE1_off PE1_port &= ~_BV(PE1_pin)
#define PE2_pin 2 //A2 = PC2
#define PE2_port PORTC
#define PE2_ddr DDRC
#define PE2_output PE2_ddr |= _BV(PE2_pin)
#define PE2_on PE2_port |= _BV(PE2_pin)
#define PE2_off PE2_port &= ~_BV(PE2_pin)
#endif
// LED
#ifdef XMEGA
#define LED_pin 1 //PD1
#define LED_port PORTD
#define LED_ddr DDRD
#define LED_on LED_port.OUTCLR = _BV(LED_pin)
#define LED_off LED_port.OUTSET = _BV(LED_pin)
#define LED_toggle LED_port.OUTTGL = _BV(LED_pin)
#define LED_output LED_port.DIRSET = _BV(LED_pin)
#define IS_LED_on (LED_port.OUT & _BV(LED_pin))
#else
#define LED_pin 5 //D13 = PB5
#define LED_port PORTB
#define LED_ddr DDRB
#define LED_on LED_port |= _BV(LED_pin)
#define LED_off LED_port &= ~_BV(LED_pin)
#define LED_toggle LED_port ^= _BV(LED_pin)
#define LED_output LED_ddr |= _BV(LED_pin)
#define IS_LED_on (LED_port & _BV(LED_pin))
#endif
//BIND
#ifdef XMEGA
#define BIND_pin 2 //PD2
#define BIND_port PORTD
#define IS_BIND_BUTTON_on ( (BIND_port.IN & _BV(BIND_pin)) == 0x00 )
#else
#define BIND_pin 5 //D13 = PB5
#define BIND_port PORTB
#define BIND_ipr PINB
#define BIND_ddr DDRB
#define BIND_SET_INPUT BIND_ddr &= ~_BV(BIND_pin)
#define BIND_SET_OUTPUT BIND_ddr |= _BV(BIND_pin)
#define BIND_SET_PULLUP BIND_port |= _BV(BIND_pin)
#define IS_BIND_BUTTON_on ( (BIND_ipr & _BV(BIND_pin)) == 0x00 )
#endif
// Macros
#define NOP() __asm__ __volatile__("nop")
#define BV(bit) (1 << bit)
//Serial flags definition
//***************
//*** Flags ***
//***************
#define RX_FLAG_on protocol_flags |= _BV(0)
#define RX_FLAG_off protocol_flags &= ~_BV(0)
#define IS_RX_FLAG_on ( ( protocol_flags & _BV(0) ) !=0 )
//
#define CHANGE_PROTOCOL_FLAG_on protocol_flags |= _BV(1)
#define CHANGE_PROTOCOL_FLAG_off protocol_flags &= ~_BV(1)
#define CHANGE_PROTOCOL_FLAG_off protocol_flags &= ~_BV(1)
#define IS_CHANGE_PROTOCOL_FLAG_on ( ( protocol_flags & _BV(1) ) !=0 )
//
#define POWER_FLAG_on protocol_flags |= _BV(2)
@ -395,45 +206,47 @@ struct PPM_Parameters
#define BIND_BUTTON_FLAG_on protocol_flags |= _BV(5)
#define BIND_BUTTON_FLAG_off protocol_flags &= ~_BV(5)
#define IS_BIND_BUTTON_FLAG_on ( ( protocol_flags & _BV(5) ) !=0 )
//PPM RX OK
#define PPM_FLAG_off protocol_flags &= ~_BV(6)
#define PPM_FLAG_off protocol_flags &= ~_BV(6)
#define PPM_FLAG_on protocol_flags |= _BV(6)
#define IS_PPM_FLAG_on ( ( protocol_flags & _BV(6) ) !=0 )
//Bind flag for blinking
//Bind flag
#define BIND_IN_PROGRESS protocol_flags &= ~_BV(7)
#define BIND_DONE protocol_flags |= _BV(7)
#define IS_BIND_DONE_on ( ( protocol_flags & _BV(7) ) !=0 )
//
#define BAD_PROTO_off protocol_flags2 &= ~_BV(0)
#define BAD_PROTO_on protocol_flags2 |= _BV(0)
#define IS_BAD_PROTO_on ( ( protocol_flags2 & _BV(0) ) !=0 )
//
#define RX_DONOTUPDTAE_off protocol_flags2 &= ~_BV(1)
#define RX_DONOTUPDTAE_on protocol_flags2 |= _BV(1)
#define IS_RX_DONOTUPDTAE_on ( ( protocol_flags2 & _BV(1) ) !=0 )
//
#define RX_MISSED_BUFF_off protocol_flags2 &= ~_BV(2)
#define RX_MISSED_BUFF_on protocol_flags2 |= _BV(2)
#define IS_RX_MISSED_BUFF_on ( ( protocol_flags2 & _BV(2) ) !=0 )
#define TX_MAIN_PAUSE_off protocol_flags2 &= ~_BV(3)
#define TX_MAIN_PAUSE_on protocol_flags2 |= _BV(3)
#define IS_TX_MAIN_PAUSE_on ( ( protocol_flags2 & _BV(3) ) !=0 )
//TX Pause
#define TX_MAIN_PAUSE_off protocol_flags2 &= ~_BV(3)
#define TX_MAIN_PAUSE_on protocol_flags2 |= _BV(3)
#define IS_TX_MAIN_PAUSE_on ( ( protocol_flags2 & _BV(3) ) !=0 )
#define TX_RX_PAUSE_off protocol_flags2 &= ~_BV(4)
#define TX_RX_PAUSE_on protocol_flags2 |= _BV(4)
#define IS_TX_RX_PAUSE_on ( ( protocol_flags2 & _BV(4) ) !=0 )
#define TX_RX_PAUSE_on protocol_flags2 |= _BV(4)
#define IS_TX_RX_PAUSE_on ( ( protocol_flags2 & _BV(4) ) !=0 )
#define IS_TX_PAUSE_on ( ( protocol_flags2 & (_BV(4)|_BV(3)) ) !=0 )
#define BLINK_BIND_TIME 100
#define BLINK_SERIAL_TIME 500
//********************
//*** Blink timing ***
//********************
#define BLINK_BIND_TIME 100
#define BLINK_SERIAL_TIME 500
#define BLINK_BAD_PROTO_TIME_LOW 1000
#define BLINK_BAD_PROTO_TIME_HIGH 50
//AUX flags definition
//*******************
//*** AUX flags ***
//*******************
#define GET_FLAG(ch, mask) ( ch ? mask : 0)
#define Servo_AUX1 Servo_AUX & _BV(0)
#define Servo_AUX2 Servo_AUX & _BV(1)
#define Servo_AUX3 Servo_AUX & _BV(2)
@ -443,8 +256,6 @@ struct PPM_Parameters
#define Servo_AUX7 Servo_AUX & _BV(6)
#define Servo_AUX8 Servo_AUX & _BV(7)
#define GET_FLAG(ch, mask) ( ch ? mask : 0)
//************************
//*** Power settings ***
//************************

243
Multiprotocol/Multiprotocol.ino
View File

@ -23,6 +23,7 @@
#include <avr/eeprom.h>
#include <avr/pgmspace.h>
//#define DEBUG_TX
#include "Pins.h"
#include "Multiprotocol.h"
//Multiprotocol module configuration file
@ -34,6 +35,9 @@
#undef A7105_INSTALLED // Disable A7105 for OrangeTX module
#undef CC2500_INSTALLED // Disable CC2500 for OrangeTX module
#undef NRF24L01_INSTALLED // Disable NRF for OrangeTX module
#define TELEMETRY // Enable telemetry
#define INVERT_TELEMETRY // Enable invert telemetry
#define DSM_TELEMETRY // Enable DSM telemetry
#endif
//Global constants/variables
@ -213,7 +217,7 @@ void setup()
#endif
PE1_output;
PE2_output;
//SERIAL_TX_output;
SERIAL_TX_output;
// pullups
MODE_DIAL1_port |= _BV(MODE_DIAL1_pin);
@ -826,68 +830,6 @@ void modules_reset()
prev_power=0xFD; // unused power value
}
int16_t map( int16_t x, int16_t in_min, int16_t in_max, int16_t out_min, int16_t out_max)
{
// return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
long y ;
x -= in_min ;
y = out_max - out_min ;
y *= x ;
x = y / (in_max - in_min) ;
return x + out_min ;
}
// Channel value is converted to 8bit values full scale
uint8_t convert_channel_8b(uint8_t num)
{
return (uint8_t) (map(limit_channel_100(num),servo_min_100,servo_max_100,0,255));
}
// Channel value is converted to 8bit values to provided values scale
uint8_t convert_channel_8b_scale(uint8_t num,uint8_t min,uint8_t max)
{
return (uint8_t) (map(limit_channel_100(num),servo_min_100,servo_max_100,min,max));
}
// Channel value is converted sign + magnitude 8bit values
uint8_t convert_channel_s8b(uint8_t num)
{
uint8_t ch;
ch = convert_channel_8b(num);
return (ch < 128 ? 127-ch : ch);
}
// Channel value is converted to 10bit values
uint16_t convert_channel_10b(uint8_t num)
{
return (uint16_t) (map(limit_channel_100(num),servo_min_100,servo_max_100,1,1023));
}
// Channel value is multiplied by 1.5
uint16_t convert_channel_frsky(uint8_t num)
{
return Servo_data[num] + Servo_data[num]/2;
}
// Channel value is converted for HK310
void convert_channel_HK310(uint8_t num, uint8_t *low, uint8_t *high)
{
uint16_t temp=0xFFFF-(4*Servo_data[num])/3;
*low=(uint8_t)(temp&0xFF);
*high=(uint8_t)(temp>>8);
}
// Channel value is limited to PPM_100
uint16_t limit_channel_100(uint8_t ch)
{
if(Servo_data[ch]>servo_max_100)
return servo_max_100;
else
if (Servo_data[ch]<servo_min_100)
return servo_min_100;
return Servo_data[ch];
}
void Mprotocol_serial_init()
{
#ifdef XMEGA
@ -942,7 +884,7 @@ static void set_rx_tx_addr(uint32_t id)
rx_tx_addr[1] = (id >> 16) & 0xFF;
rx_tx_addr[2] = (id >> 8) & 0xFF;
rx_tx_addr[3] = (id >> 0) & 0xFF;
rx_tx_addr[4] = 0xC1; // for YD717: always uses first data port
rx_tx_addr[4] = (rx_tx_addr[2]&0xF0)|(rx_tx_addr[3]&0x0F);
}
#ifndef XMEGA
@ -985,179 +927,6 @@ static uint32_t random_id(uint16_t adress, uint8_t create_new)
return id;
}
/********************/
/** SPI routines **/
/********************/
#ifdef XMEGA
#define XNOP() NOP()
#else
#define XNOP()
#endif
void SPI_Write(uint8_t command)
{
uint8_t n=8;
SCLK_off;//SCK start low
XNOP();
SDI_off;
XNOP();
do
{
if(command&0x80)
SDI_on;
else
SDI_off;
XNOP();
SCLK_on;
XNOP();
XNOP();
command = command << 1;
SCLK_off;
XNOP();
}
while(--n) ;
SDI_on;
}
uint8_t SPI_Read(void)
{
uint8_t result=0,i;
for(i=0;i<8;i++)
{
result=result<<1;
if(SDO_1)
result |= 0x01;
SCLK_on;
XNOP();
XNOP();
NOP();
SCLK_off;
XNOP();
XNOP();
}
return result;
}
/************************************/
/** Arduino replacement routines **/
/************************************/
// replacement millis() and micros()
// These work polled, no interrupts
// micros() MUST be called at least once every 32 milliseconds
uint16_t MillisPrecount ;
uint16_t lastTimerValue ;
uint32_t TotalMicros ;
uint32_t TotalMillis ;
uint8_t Correction ;
uint32_t micros()
{
uint16_t elapsed ;
uint8_t millisToAdd ;
uint8_t oldSREG = SREG ;
cli() ;
uint16_t time = TCNT1 ; // Read timer 1
SREG = oldSREG ;
elapsed = time - lastTimerValue ;
elapsed += Correction ;
Correction = elapsed & 0x01 ;
elapsed >>= 1 ;
uint32_t ltime = TotalMicros ;
ltime += elapsed ;
cli() ;
TotalMicros = ltime ; // Done this way for RPM to work correctly
lastTimerValue = time ;
SREG = oldSREG ; // Still valid from above
elapsed += MillisPrecount;
millisToAdd = 0 ;
if ( elapsed > 15999 )
{
millisToAdd = 16 ;
elapsed -= 16000 ;
}
if ( elapsed > 7999 )
{
millisToAdd += 8 ;
elapsed -= 8000 ;
}
if ( elapsed > 3999 )
{
millisToAdd += 4 ;
elapsed -= 4000 ;
}
if ( elapsed > 1999 )
{
millisToAdd += 2 ;
elapsed -= 2000 ;
}
if ( elapsed > 999 )
{
millisToAdd += 1 ;
elapsed -= 1000 ;
}
TotalMillis += millisToAdd ;
MillisPrecount = elapsed ;
return TotalMicros ;
}
uint32_t millis()
{
micros() ;
return TotalMillis ;
}
void delayMilliseconds(unsigned long ms)
{
uint16_t start = (uint16_t)micros();
uint16_t lms = ms ;
while (lms > 0) {
if (((uint16_t)micros() - start) >= 1000) {
lms--;
start += 1000;
}
}
}
/* Important notes:
- Max value is 16000µs
- delay is not accurate due to interrupts happening */
void delayMicroseconds(unsigned int us)
{
if (--us == 0)
return;
us <<= 2; // * 4
us -= 2; // - 2
#ifdef XMEGA
__asm__ __volatile__ (
"1: sbiw %0,1" "\n\t" // 2 cycles
"nop \n"
"nop \n"
"nop \n"
"nop \n"
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
);
#else
__asm__ __volatile__ (
"1: sbiw %0,1" "\n\t" // 2 cycles
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
);
#endif
}
#ifndef XMEGA
void init()
{
// this needs to be called before setup() or some functions won't work there
sei();
}
#endif //XMEGA
/**************************/
/**************************/
/** Interrupt routines **/

10
Multiprotocol/NRF24l01_SPI.ino
View File

@ -221,11 +221,11 @@ void NRF24L01_Reset()
uint8_t NRF24L01_packet_ack()
{
switch (NRF24L01_ReadReg(NRF24L01_07_STATUS) & (BV(NRF24L01_07_TX_DS) | BV(NRF24L01_07_MAX_RT)))
switch (NRF24L01_ReadReg(NRF24L01_07_STATUS) & (_BV(NRF24L01_07_TX_DS) | _BV(NRF24L01_07_MAX_RT)))
{
case BV(NRF24L01_07_TX_DS):
case _BV(NRF24L01_07_TX_DS):
return PKT_ACKED;
case BV(NRF24L01_07_MAX_RT):
case _BV(NRF24L01_07_MAX_RT):
return PKT_TIMEOUT;
}
return PKT_PENDING;
@ -322,8 +322,8 @@ void XN297_SetRXAddr(const uint8_t* addr, uint8_t len)
void XN297_Configure(uint8_t flags)
{
xn297_crc = !!(flags & BV(NRF24L01_00_EN_CRC));
flags &= ~(BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO));
xn297_crc = !!(flags & _BV(NRF24L01_00_EN_CRC));
flags &= ~(_BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_00_CONFIG, flags & 0xFF);
}

203
Multiprotocol/Pins.h Normal file
View File

@ -0,0 +1,203 @@
/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
//*******************
//*** Pinouts ***
//*******************
// TX
#define SERIAL_TX_pin 1 //PD1
#define SERIAL_TX_port PORTD
#define SERIAL_TX_ddr DDRD
#define SERIAL_TX_output SERIAL_TX_ddr |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_on SERIAL_TX_port |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_off SERIAL_TX_port &= ~_BV(SERIAL_TX_pin)
#ifdef DEBUG_TX
#define DEBUG_TX_on SERIAL_TX_ON
#define DEBUG_TX_off SERIAL_TX_OFF
#define DEBUG_TX_toggle SERIAL_TX_port ^= _BV(SERIAL_TX_pin)
#else
#define DEBUG_TX_on
#define DEBUG_TX_off
#define DEBUG_TX_toggle
#endif
// Dial
#define MODE_DIAL1_pin 2
#define MODE_DIAL1_port PORTB
#define MODE_DIAL1_ipr PINB
#define MODE_DIAL2_pin 3
#define MODE_DIAL2_port PORTB
#define MODE_DIAL2_ipr PINB
#define MODE_DIAL3_pin 4
#define MODE_DIAL3_port PORTB
#define MODE_DIAL3_ipr PINB
#define MODE_DIAL4_pin 0
#define MODE_DIAL4_port PORTC
#define MODE_DIAL4_ipr PINC
// PPM
#define PPM_pin 3 //D3 = PD3
#define PPM_port PORTD
// SDIO
#define SDI_pin 5 //D5 = PD5
#define SDI_port PORTD
#define SDI_ipr PIND
#define SDI_ddr DDRD
#ifdef XMEGA
#define SDI_on SDI_port.OUTSET = _BV(SDI_pin)
#define SDI_off SDI_port.OUTCLR = _BV(SDI_pin)
#else
#define SDI_on SDI_port |= _BV(SDI_pin)
#define SDI_off SDI_port &= ~_BV(SDI_pin)
#define SDI_1 (SDI_ipr & _BV(SDI_pin))
#define SDI_0 (SDI_ipr & _BV(SDI_pin)) == 0x00
#endif
#define SDI_input SDI_ddr &= ~_BV(SDI_pin)
#define SDI_output SDI_ddr |= _BV(SDI_pin)
//SDO
#define SDO_pin 6 //D6 = PD6
#define SDO_port PORTD
#define SDO_ipr PIND
#ifdef XMEGA
#define SDO_1 (SDO_port.IN & _BV(SDO_pin))
#define SDO_0 (SDO_port.IN & _BV(SDO_pin)) == 0x00
#else
#define SDO_1 (SDO_ipr & _BV(SDO_pin))
#define SDO_0 (SDO_ipr & _BV(SDO_pin)) == 0x00
#endif
// SCLK
#define SCLK_port PORTD
#define SCLK_ddr DDRD
#ifdef XMEGA
#define SCLK_pin 7 //PD7
#define SCLK_on SCLK_port.OUTSET = _BV(SCLK_pin)
#define SCLK_off SCLK_port.OUTCLR = _BV(SCLK_pin)
#else
#define SCLK_pin 4 //D4 = PD4
#define SCLK_output SCLK_ddr |= _BV(SCLK_pin)
#define SCLK_on SCLK_port |= _BV(SCLK_pin)
#define SCLK_off SCLK_port &= ~_BV(SCLK_pin)
#endif
// A7105
#define A7105_CSN_pin 2 //D2 = PD2
#define A7105_CSN_port PORTD
#define A7105_CSN_ddr DDRD
#define A7105_CSN_output A7105_CSN_ddr |= _BV(A7105_CSN_pin)
#define A7105_CSN_on A7105_CSN_port |= _BV(A7105_CSN_pin)
#define A7105_CSN_off A7105_CSN_port &= ~_BV(A7105_CSN_pin)
// CC2500
#define CC25_CSN_pin 7 //D7 = PD7
#define CC25_CSN_port PORTD
#define CC25_CSN_ddr DDRD
#define CC25_CSN_output CC25_CSN_ddr |= _BV(CC25_CSN_pin)
#define CC25_CSN_on CC25_CSN_port |= _BV(CC25_CSN_pin)
#define CC25_CSN_off CC25_CSN_port &= ~_BV(CC25_CSN_pin)
// NRF24L01
#define NRF_CSN_pin 0 //D8 = PB0
#define NRF_CSN_port PORTB
#define NRF_CSN_ddr DDRB
#define NRF_CSN_output NRF_CSN_ddr |= _BV(NRF_CSN_pin)
#define NRF_CSN_on NRF_CSN_port |= _BV(NRF_CSN_pin)
#define NRF_CSN_off NRF_CSN_port &= ~_BV(NRF_CSN_pin)
#define NRF_CE_on
#define NRF_CE_off
// CYRF6936
#ifdef XMEGA
#define CYRF_CSN_pin 4 //PD4
#define CYRF_CSN_port PORTD
#define CYRF_CSN_ddr DDRD
#define CYRF_CSN_on CYRF_CSN_port.OUTSET = _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port.OUTCLR = _BV(CYRF_CSN_pin)
#else
#define CYRF_CSN_pin 1 //D9 = PB1
#define CYRF_CSN_port PORTB
#define CYRF_CSN_ddr DDRB
#define CYRF_CSN_output CYRF_CSN_ddr |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_on CYRF_CSN_port |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port &= ~_BV(CYRF_CSN_pin)
#define CYRF_RST_pin 5 //A5 = PC5
#define CYRF_RST_port PORTC
#define CYRF_RST_ddr DDRC
#define CYRF_RST_output CYRF_RST_ddr |= _BV(CYRF_RST_pin)
#define CYRF_RST_HI CYRF_RST_port |= _BV(CYRF_RST_pin)
#define CYRF_RST_LO CYRF_RST_port &= ~_BV(CYRF_RST_pin)
#endif
//RF Switch
#ifdef XMEGA
#define PE1_on
#define PE1_off
#define PE2_on
#define PE2_off
#else
#define PE1_pin 1 //A1 = PC1
#define PE1_port PORTC
#define PE1_ddr DDRC
#define PE1_output PE1_ddr |= _BV(PE1_pin)
#define PE1_on PE1_port |= _BV(PE1_pin)
#define PE1_off PE1_port &= ~_BV(PE1_pin)
#define PE2_pin 2 //A2 = PC2
#define PE2_port PORTC
#define PE2_ddr DDRC
#define PE2_output PE2_ddr |= _BV(PE2_pin)
#define PE2_on PE2_port |= _BV(PE2_pin)
#define PE2_off PE2_port &= ~_BV(PE2_pin)
#endif
// LED
#ifdef XMEGA
#define LED_pin 1 //PD1
#define LED_port PORTD
#define LED_ddr DDRD
#define LED_on LED_port.OUTCLR = _BV(LED_pin)
#define LED_off LED_port.OUTSET = _BV(LED_pin)
#define LED_toggle LED_port.OUTTGL = _BV(LED_pin)
#define LED_output LED_port.DIRSET = _BV(LED_pin)
#define IS_LED_on (LED_port.OUT & _BV(LED_pin))
#else
#define LED_pin 5 //D13 = PB5
#define LED_port PORTB
#define LED_ddr DDRB
#define LED_on LED_port |= _BV(LED_pin)
#define LED_off LED_port &= ~_BV(LED_pin)
#define LED_toggle LED_port ^= _BV(LED_pin)
#define LED_output LED_ddr |= _BV(LED_pin)
#define IS_LED_on (LED_port & _BV(LED_pin))
#endif
//BIND
#ifdef XMEGA
#define BIND_pin 2 //PD2
#define BIND_port PORTD
#define IS_BIND_BUTTON_on ( (BIND_port.IN & _BV(BIND_pin)) == 0x00 )
#else
#define BIND_pin 5 //D13 = PB5
#define BIND_port PORTB
#define BIND_ipr PINB
#define BIND_ddr DDRB
#define BIND_SET_INPUT BIND_ddr &= ~_BV(BIND_pin)
#define BIND_SET_OUTPUT BIND_ddr |= _BV(BIND_pin)
#define BIND_SET_PULLUP BIND_port |= _BV(BIND_pin)
#define IS_BIND_BUTTON_on ( (BIND_ipr & _BV(BIND_pin)) == 0x00 )
#endif

2
Multiprotocol/SHENQI_nrf24l01.ino
View File

@ -94,7 +94,7 @@ uint16_t SHENQI_callback()
SHENQI_send_packet();
else
{
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & BV(NRF24L01_07_RX_DR))
if( NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_RX_DR))
{
if(LT8900_ReadPayload(packet, 3))
{

6
Multiprotocol/SLT_nrf24l01.ino
View File

@ -34,7 +34,7 @@ enum {
static void __attribute__((unused)) SLT_init()
{
NRF24L01_Initialize();
NRF24L01_WriteReg(NRF24L01_00_CONFIG, BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO)); // 2-bytes CRC, radio off
NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO)); // 2-bytes CRC, radio off
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknoledgement
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01); // Enable data pipe 0
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x02); // 4-byte RX/TX address
@ -93,7 +93,7 @@ static void __attribute__((unused)) SLT_set_tx_id(void)
static void __attribute__((unused)) SLT_wait_radio()
{
if (packet_sent)
while (!(NRF24L01_ReadReg(NRF24L01_07_STATUS) & BV(NRF24L01_07_TX_DS))) ;
while (!(NRF24L01_ReadReg(NRF24L01_07_STATUS) & _BV(NRF24L01_07_TX_DS))) ;
packet_sent = 0;
}
@ -101,7 +101,7 @@ static void __attribute__((unused)) SLT_send_data(uint8_t *data, uint8_t len)
{
SLT_wait_radio();
NRF24L01_FlushTx();
NRF24L01_WriteReg(NRF24L01_07_STATUS, BV(NRF24L01_07_TX_DS) | BV(NRF24L01_07_RX_DR) | BV(NRF24L01_07_MAX_RT));
NRF24L01_WriteReg(NRF24L01_07_STATUS, _BV(NRF24L01_07_TX_DS) | _BV(NRF24L01_07_RX_DR) | _BV(NRF24L01_07_MAX_RT));
NRF24L01_WritePayload(data, len);
//NRF24L01_PulseCE();
packet_sent = 1;

84
Multiprotocol/SPI.ino Normal file
View File

@ -0,0 +1,84 @@
/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
/********************/
/** SPI routines **/
/********************/
#ifdef XMEGA
#define XNOP() NOP()
#else
#define XNOP()
#endif
void SPI_Write(uint8_t command)
{
uint8_t n=8;
SCLK_off;//SCK start low
XNOP();
SDI_off;
XNOP();
do
{
if(command&0x80)
SDI_on;
else
SDI_off;
XNOP();
SCLK_on;
XNOP();
XNOP();
command = command << 1;
SCLK_off;
XNOP();
}
while(--n) ;
SDI_on;
}
uint8_t SPI_Read(void)
{
uint8_t result=0,i;
for(i=0;i<8;i++)
{
result=result<<1;
if(SDO_1)
result |= 0x01;
SCLK_on;
XNOP();
XNOP();
NOP();
SCLK_off;
XNOP();
XNOP();
}
return result;
}
uint8_t SPI_SDIO_Read(void)
{
uint8_t result=0;
SDI_input;
for(uint8_t i=0;i<8;i++)
{
result=result<<1;
if(SDI_1) ///if SDIO =1
result |= 0x01;
SCLK_on;
NOP();
SCLK_off;
}
SDI_output;
return result;
}

2
Multiprotocol/Symax_nrf24l01.ino
View File

@ -174,7 +174,7 @@ static void __attribute__((unused)) symax_init()
NRF24L01_SetTxRxMode(TX_EN);
//
NRF24L01_ReadReg(NRF24L01_07_STATUS);
NRF24L01_WriteReg(NRF24L01_00_CONFIG, BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknoledgement
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x3F); // Enable all data pipes (even though not used?)
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03); // 5-byte RX/TX address

17
Multiprotocol/Telemetry.ino
View File

@ -1,8 +1,20 @@
/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Multiprotocol is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
//**************************
// Telemetry serial code *
// By Midelic on RCGroups *
//**************************
#if defined TELEMETRY
#if defined SPORT_TELEMETRY
@ -812,4 +824,3 @@ ISR(TIMER0_OVF_vect)
#endif // BASH_SERIAL
#endif // TELEMETRY

4
Multiprotocol/V2X2_nrf24l01.ino
View File

@ -80,7 +80,7 @@ static void __attribute__((unused)) v202_init()
NRF24L01_Initialize();
// 2-bytes CRC, radio off
NRF24L01_WriteReg(NRF24L01_00_CONFIG, BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknoledgement
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x3F); // Enable all data pipes
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03); // 5-byte RX/TX address
@ -116,7 +116,7 @@ static void __attribute__((unused)) V202_init2()
// Turn radio power on
NRF24L01_SetTxRxMode(TX_EN);
//Done by TX_EN??? => NRF24L01_WriteReg(NRF24L01_00_CONFIG, BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_CRCO) | BV(NRF24L01_00_PWR_UP));
//Done by TX_EN??? => NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO) | _BV(NRF24L01_00_PWR_UP));
}
static void __attribute__((unused)) V2X2_set_tx_id(void)

4
Multiprotocol/YD717_nrf24l01.ino
View File

@ -101,7 +101,7 @@ static void __attribute__((unused)) yd717_send_packet(uint8_t bind)
}
// clear packet status bits and TX FIFO
NRF24L01_WriteReg(NRF24L01_07_STATUS, (BV(NRF24L01_07_TX_DS) | BV(NRF24L01_07_MAX_RT)));
NRF24L01_WriteReg(NRF24L01_07_STATUS, (_BV(NRF24L01_07_TX_DS) | _BV(NRF24L01_07_MAX_RT)));
NRF24L01_FlushTx();
if( sub_protocol == YD717 )
@ -124,7 +124,7 @@ static void __attribute__((unused)) yd717_init()
// CRC, radio on
NRF24L01_SetTxRxMode(TX_EN);
NRF24L01_WriteReg(NRF24L01_00_CONFIG, BV(NRF24L01_00_EN_CRC) | BV(NRF24L01_00_PWR_UP));
NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_PWR_UP));
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // Disable Acknoledgement on all data pipes
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x00); // Disable all data pipes
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x03); // 5-byte RX/TX address