Code cleanup

2025-12-27 06:30:16 +00:00 · 2016-09-21 14:28:37 +02:00
parent 73aab88109
commit cfcd6e5f93
24 changed files with 585 additions and 515 deletions
--- a/Multiprotocol/Arduino.ino
+++ b/Multiprotocol/Arduino.ino
@@ -0,0 +1,133 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+/************************************/
+/**  Arduino replacement routines  **/
+/************************************/
+// replacement millis() and micros()
+// These work polled, no interrupts
+// micros() MUST be called at least once every 32 milliseconds
+uint16_t MillisPrecount ;
+uint16_t lastTimerValue ;
+uint32_t TotalMicros ;
+uint32_t TotalMillis ;
+uint8_t Correction ;
+
+uint32_t micros()
+{
+   uint16_t elapsed ;
+   uint8_t millisToAdd ;
+   uint8_t oldSREG = SREG ;
+   cli() ;
+   uint16_t time = TCNT1 ;   // Read timer 1
+   SREG = oldSREG ;
+
+   elapsed = time - lastTimerValue ;
+   elapsed += Correction ;
+   Correction = elapsed & 0x01 ;
+   elapsed >>= 1 ;
+   
+   uint32_t ltime = TotalMicros ;
+   ltime += elapsed ;
+   cli() ;
+   TotalMicros = ltime ;   // Done this way for RPM to work correctly
+   lastTimerValue = time ;
+   SREG = oldSREG ;   // Still valid from above
+   
+   elapsed += MillisPrecount;
+   millisToAdd = 0 ;
+   
+   if ( elapsed  > 15999 )
+   {
+      millisToAdd = 16 ;
+      elapsed -= 16000 ;
+   }
+   if ( elapsed  > 7999 )
+   {
+      millisToAdd += 8 ;
+      elapsed -= 8000 ;
+   }
+   if ( elapsed  > 3999 )
+   {
+      millisToAdd += 4 ;      
+      elapsed -= 4000 ;
+   }
+   if ( elapsed  > 1999 )
+   {
+      millisToAdd += 2 ;
+      elapsed -= 2000 ;
+   }
+   if ( elapsed  > 999 )
+   {
+      millisToAdd += 1 ;
+      elapsed -= 1000 ;
+   }
+   TotalMillis += millisToAdd ;
+   MillisPrecount = elapsed ;
+   return TotalMicros ;
+}
+
+uint32_t millis()
+{
+   micros() ;
+   return TotalMillis ;
+}
+
+void delayMilliseconds(unsigned long ms)
+{
+   uint16_t start = (uint16_t)micros();
+   uint16_t lms = ms ;
+
+   while (lms > 0) {
+      if (((uint16_t)micros() - start) >= 1000) {
+         lms--;
+         start += 1000;
+      }
+   }
+}
+
+/* Important notes:
+	- Max value is 16000µs
+	- delay is not accurate due to interrupts happening */
+void delayMicroseconds(unsigned int us)
+{
+   if (--us == 0)
+      return;
+   us <<= 2;	// * 4
+   us -= 2;		// - 2
+#ifdef XMEGA
+	 __asm__ __volatile__ (
+      "1: sbiw %0,1" "\n\t" // 2 cycles
+			"nop \n"
+			"nop \n"
+			"nop \n"
+			"nop \n"
+      "brne 1b" : "=w" (us) : "0" (us) // 2 cycles
+   );
+#else   
+	 __asm__ __volatile__ (
+      "1: sbiw %0,1" "\n\t" // 2 cycles
+      "brne 1b" : "=w" (us) : "0" (us) // 2 cycles
+   );
+#endif
+}
+
+#ifndef XMEGA
+	void init()
+	{
+	   // this needs to be called before setup() or some functions won't work there
+	   sei();
+	}
+#endif //XMEGA
+