gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-01 19:33:14 +00:00
Code Issues Projects Releases Wiki Activity

Removed PPM 125% statements

Browse Source
This commit is contained in:
Pascal Langer
2018-01-09 09:04:55 +01:00
parent 984aa3f413
commit cd235bbcde
4 changed files with 6 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Multiprotocol/_Config.h
View File

@@ -284,13 +284,11 @@
// A few things to consider:
// - If you put too big values compared to your TX you won't be able to reach the extremes which is bad for throttle as an example
// - If you put too low values you won't be able to use your full stick range, it will be maxed out before reaching the ends
// - Centered stick value is usually 1500. It should match the middle between MIN and MAX, ie Center=(MAX-MIN)/2+MIN. If your TX is not centered you can adjust the value MIN or MAX.
// - 100% is the value when the model is by default, 125% is the value when you extend the servo travel which is only used by some protocols
// - Centered stick value is usually 1500. It should match the middle between MIN and MAX, ie Center=(MAX+MIN)/2. If your TX is not centered you can adjust the value MIN or MAX.
// - 100% is referred as the value when the TX is set to default with no trims
#if defined(TX_CUSTOM)
#define PPM_MAX_100 1900 // 100%
#define PPM_MIN_100 1100 // 100%
#define PPM_MAX_125 2000 // 125%
#define PPM_MIN_125 1000 // 125%
#endif
/** Number of PPM Channels **/
@@ -462,7 +460,7 @@ const PPM_Parameters PPM_prot[15]= {
COR_V2
*/
// RX_Num is used for model match. Using RX_Num values different for each receiver will prevent starting a model with the false config loaded...
// RX_Num is used for TX & RX match. Using different RX_Num values for each receiver will prevent starting a model with the false config loaded...
// RX_Num value is between 0 and 15.
// Power P_HIGH or P_LOW: High or low power setting for the transmission.