gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-28 23:43:16 +00:00
Code Issues Projects Releases Wiki Activity

Prep for HoTT protocol and fix STM32 seed

Browse Source
This commit is contained in:
pascallanger
2019-11-02 20:51:41 +01:00
parent e6e4d33847
commit ca15d7108f
6 changed files with 46 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Multiprotocol/_Config.h
View File

@@ -87,17 +87,18 @@
//#define ORANGE_TX_BLUE
/** CC2500 Fine Frequency Tuning **/
//For optimal performance the CC2500 RF module used by the FrSkyD, FrSkyV, FrSkyX, SFHSS, CORONA, Redpine and Hitec protocols needs to be tuned for each protocol.
//Initial tuning should be done via the radio menu with a genuine FrSky/Futaba/CORONA/Hitec/Redpine receiver.
//For optimal performance the CC2500 RF module used by the CORONA, FrSkyD, FrSkyV, FrSkyX, Hitec, HoTT, SFHSS and Redpine protocols needs to be tuned for each protocol.
//Initial tuning should be done via the radio menu with a genuine CORONA/FrSky/Hitec/HoTT/Futaba/Redpine receiver.
//Once a good tuning value is found it can be set here and will override the radio's 'option' setting for all existing and new models which use that protocol.
//For more information: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/tree/master/docs/Frequency_Tuning.md
//Uncomment the lines below (remove the "//") and set an appropriate value (replace the "0") to enable. Valid range is -127 to +127.
//#define FORCE_CORONA_TUNING 0
//#define FORCE_FRSKYD_TUNING 0
//#define FORCE_FRSKYV_TUNING 0
//#define FORCE_FRSKYX_TUNING 0
//#define FORCE_SFHSS_TUNING 0
//#define FORCE_CORONA_TUNING 0
//#define FORCE_HITEC_TUNING 0
//#define FORCE_HOTT_TUNING 0
//#define FORCE_REDPINE_TUNING 0
/** A7105 Fine Frequency Tuning **/
@@ -178,6 +179,7 @@
#define FRSKYX_CC2500_INO
#define FRSKY_RX_CC2500_INO
#define HITEC_CC2500_INO
//#define HOTT_CC2500_INO
#define SCANNER_CC2500_INO
#define SFHSS_CC2500_INO
#define REDPINE_CC2500_INO
@@ -283,8 +285,7 @@
//Send to OpenTX the current protocol and subprotocol names. Comment to disable.
#define MULTI_NAMES
//Sync OpenTX frames with the current protocol timing. This feature is only available on the STM32 module. Comment to disable.
//!!! Work in progress !!! Do not enable for internal module
//#define MULTI_SYNC
#define MULTI_SYNC
//Comment a line to disable a specific protocol telemetry
#define DSM_TELEMETRY // Forward received telemetry packet directly to TX to be decoded by er9x, erskyTX and OpenTX
@@ -588,6 +589,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
JJRCX1
X5C1
FQ777_951
PROTO_HOTT
NONE
PROTO_HUBSAN
H107
H301