Test image

This commit is contained in:
LapinFou 2017-04-18 18:40:02 +02:00
parent 709c5cbd71
commit c949eb5491

View File

@ -16,7 +16,7 @@ The procedure below will guide you through all the steps to upload successfully
### Material you need to upload the firmware ### Material you need to upload the firmware
1. USBASP programmer supporting 3.3V: 1. USBASP programmer supporting 3.3V:
<img src="images/USBasp_Programmer.jpeg" width="200" height="200" /> ![](images/USBasp_Programmer.jpeg =200x)
[(example aliexpress link)](https://www.aliexpress.com/item/USBasp-USB-ISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-ATMEGA128-New-10PIN-Wire-Support/2036402518.html?spm=2114.30010308.8.10.jIbHzs) [(example aliexpress link)](https://www.aliexpress.com/item/USBasp-USB-ISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-ATMEGA128-New-10PIN-Wire-Support/2036402518.html?spm=2114.30010308.8.10.jIbHzs)
There are reports that some of the cheap programmers are not safe to use with 3.3V units, usually the black PCB versions are ok. There are reports that some of the cheap programmers are not safe to use with 3.3V units, usually the black PCB versions are ok.
1. 10pin to 6pin adapter: 1. 10pin to 6pin adapter: