From c623113d186684d8c016ab9cbe9401b6c3342d64 Mon Sep 17 00:00:00 2001 From: Peter Feerick Date: Sun, 13 May 2018 16:06:18 +1000 Subject: [PATCH] Numbered list since instructions are sequential --- Protocols_Details.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/Protocols_Details.md b/Protocols_Details.md index 83efcb8..fe5675b 100644 --- a/Protocols_Details.md +++ b/Protocols_Details.md @@ -38,15 +38,15 @@ The protocol selection is based on 2 parameters: - to go to the next bank, short press the bind button, this action is confirmed by the LED staying on for 1.5 sec Here is the full protocol selection procedure: - * turn the selection switch to 15 - * power up the module - * the module displays the current bank by flashing the LED x number of times, x being between 1 and up to 5 - * a short press on the bind button turns the LED on for 1 sec indicating that the system has changed the bank - * repeat operation 3 and 4 until you have reached the bank you want - * power off - * change the rotary switch to the desired position (1..14) - * power on - * enjoy +1. turn the selection switch to 15 +2. power up the module +3. the module displays the current bank by flashing the LED x number of times, x being between 1 and up to 5 +4. a short press on the bind button turns the LED on for 1 sec indicating that the system has changed the bank +5. repeat operation 3 and 4 until you have reached the bank you want +6. power off +7. change the rotary switch to the desired position (1..14) +8. power on +9. enjoy Notes: * **The protocol selection must be done before the module is turned on**