From c3b163541759c260e24c93ae734c06053921f440 Mon Sep 17 00:00:00 2001
From: pascallanger <pascal_langer@yahoo.fr>
Date: Mon, 28 Dec 2015 20:42:00 +0100
Subject: [PATCH] Update README.md

---
 README.md | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/README.md b/README.md
index c8270e8..e688f99 100644
--- a/README.md
+++ b/README.md
@@ -299,7 +299,11 @@ You can 3D print your box (detalis [here](http://www.rcgroups.com/forums/showpos
 ##Compilation
 
 ###Toolchain
-Arduino 1.6.5.
+Arduino 1.6.5
+
+Compilation of the code posted here works. So if it doesn't for you this is a problem with your setup, please double check everything before asking.
+
+Multiprotocol.ino header can be modified to compile with/without some protocols, change protocols/sub_protocols associated with dials, different channel orders, different channels timing, 8 or 16 channels serial protocol, Telemetry or not, ... 
 
 ###Upload the code using ISP (In System Programming)
 The recommendation is to use an external programmer like [USBASP](http://www.banggood.com/USBASP-USBISP-3_3-5V-AVR-Downloader-Programmer-With-ATMEGA8-ATMEGA128-p-934425.html) to upload the code in the Atmega328. The programmer should be set to 3.3V or to not supply any voltage to the multimodule to avoid any damages.