gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-10 14:18:12 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling_STM32.md

Browse Source 
Added IRX4 images and a note about the need to burn the USB bootloader on Banggood modules.
This commit is contained in:
Ben Lye 2017-12-10 09:07:54 +00:00 committed by GitHub
parent 122e9f4fca
commit c297df76ef
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Compiling_STM32.md
View File

@ -105,9 +105,9 @@ The wiring for the USB-to-TTL adapter is:
**It is critical to ensure that the USB-to-TTL adapter is set to 3.3V**. **It is critical to ensure that the USB-to-TTL adapter is set to 3.3V**.
| **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Plus Module** | | **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Module** |
|:---:|:---:|:---:| |:---:|:---:|:---:|
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-ch340g.jpg" height="200"/> | TBD | | <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-ch340g.jpg" height="200"/> | <img src="images/irx4-ch340g.jpg" height="200"/> |
1. Put the module in the transmitter 1. Put the module in the transmitter
1. Connect the USB-to-TTL adapter to the module as described above 1. Connect the USB-to-TTL adapter to the module as described above
@ -123,10 +123,10 @@ The bootloader only needs to be installed once unless you decide to switch from
In order to flash the bootloader the **BOOT0** jumper must be installed. The location of **BOOT0** varies by hardware module. In order to flash the bootloader the **BOOT0** jumper must be installed. The location of **BOOT0** varies by hardware module.
| **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Plus Module** | | **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Module** |
|:---:|:---:|:---:| |:---:|:---:|:---:|
| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | TBD | | Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. |
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/> | TBD | | <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/> | <img src="images/irx4-boot0.jpg" height="200"/> |
1. Install the **BOOT0** jumper as described above 1. Install the **BOOT0** jumper as described above
1. Switch on the transmitter 1. Switch on the transmitter
@ -196,6 +196,8 @@ In order for these devices to be correctly identified in Windows it is necessary
##### Windows XP or older ##### Windows XP or older
1. Download and install the legacy Windows XP drivers from [here](https://github.com/rogerclarkmelbourne/Arduino_STM32/tree/master/drivers/win/win_xp_legacy) 1. Download and install the legacy Windows XP drivers from [here](https://github.com/rogerclarkmelbourne/Arduino_STM32/tree/master/drivers/win/win_xp_legacy)
**NOTE:** If you have installed the drivers and your module is not detected as a Maple device it most likely does not have a USB bootloader installed. Ready-made modules from Banggood **do not** come with a USB bootloader installed. You will need to follow the procedure to [Burn a USB bootloader](#burn-the-bootloader) before you can upload firmware.
### Upload the firmware via USB ### Upload the firmware via USB
**Note:** Power to the module will be supplied via the USB cable. If the module is installed in a transmitter, the transmitter should be switched off. **Note:** Power to the module will be supplied via the USB cable. If the module is installed in a transmitter, the transmitter should be switched off.