From bf1a842955b64296be03c0c90a7f6cad80876416 Mon Sep 17 00:00:00 2001 From: pascallanger Date: Tue, 6 Feb 2024 12:06:17 +0100 Subject: [PATCH] Update Protocols_Details.md --- Protocols_Details.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Protocols_Details.md b/Protocols_Details.md index f897fab..f6f61f6 100644 --- a/Protocols_Details.md +++ b/Protocols_Details.md @@ -1444,13 +1444,13 @@ Channels 14 and 15 (ANAAUX1 and ANAAUX2) only available with analog aux channel ### Sub_protocol BAYANG - *0* Models: Eachine H8(C) mini, BayangToys X6/X7/X9, JJRC JJ850, Floureon H101 ... -Option=0 -> normal Bayang protocol +Option=0 or Telemetry = Off -> normal Bayang protocol -Option=1 -> enable telemetry with [Silverxxx firmware](https://github.com/silver13/H101-acro/tree/master). Value returned to the TX using FrSkyD Hub are RX RSSI, TX RSSI, A1=uncompensated battery voltage (set the ratio to 5.0 and adjust with offset), A2=compensated battery voltage (set the ratio to 5.0 and adjust with offset) and if supported AccX=P, AccY=I, ACCZ=D (which you can rename after the sensors discovery) +Option=1 or Telemetry = On -> enable telemetry with [Silverxxx firmware](https://github.com/silver13/H101-acro/tree/master). Value returned to the TX using FrSkyD Hub are RX RSSI, TX RSSI, A1=uncompensated battery voltage (set the ratio to 5.0 and adjust with offset), A2=compensated battery voltage (set the ratio to 5.0 and adjust with offset) and if supported AccX=P, AccY=I, ACCZ=D (which you can rename after the sensors discovery) -Option=2 -> enable analog aux channels with [NFE Silverware firmware](https://github.com/NotFastEnuf/NFE_Silverware). Two otherwise static bytes in the protocol overridden to add two 'analog' (non-binary) auxiliary channels. +Option=2 or Telemetry = Off+AUX -> enable analog aux channels with [NFE Silverware firmware](https://github.com/NotFastEnuf/NFE_Silverware). Two otherwise static bytes in the protocol overridden to add two 'analog' (non-binary) auxiliary channels. -Option=3 -> both Silverware telemetry and analog aux channels enabled. +Option=3 or Telemetry = On+AUX-> both Silverware telemetry and analog aux channels enabled. ### Sub_protocol H8S3D - *1* Model: H8S 3D