gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 21:48:12 +00:00
Code Issues Projects Releases Wiki Activity

Multi_STM32 flashing info

Browse Source
This commit is contained in:
midelic 2017-01-25 13:52:52 +02:00 committed by GitHub
parent 857715e55c
commit be8571cb56
1 changed files with 5 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
docs/Compiling_STM32.md
View File

@ -96,11 +96,13 @@ This method use USB connector on the STM32 V1.0 board or on the maple clone boar
1. After that select the correct serial port and and upload sketches normally in Arduino using USB port
###Flashing binary file:
If you want to flash a pre-compiled binary file (like the Release .bin files) you need specialized software and the FTDI cable.
If you want to flash a pre-compiled binary file (like the Release .bin files) you need specialized software and the same FTDI cable setup already posted [here](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling_STM32.md#option-1-flashing-with-tx-powerhighly-recommended).
1. Set BOOT0 jumper
1. Connect your 3.3V FTDI cable (USB - TTL serial) to Multiprotocol serial port (RX,TX,GND,5V)
1. Set BOOT0 jumper(skip this step if you aready made your own cable ,see above)
1. Connect your 3.3V FTDI cable (USB - TTL serial) to Multiprotocol serial port (RX,TX,GND pins when flashing with TX power).
1. Insert first FTDI serial to USB port.Start TX (only if using flashing with TX power method)
1. The other steps regarding power supply the same as previous recommandation regarding jumpers
For uploading binaries(.bin files) there is a specialized software you need to install on your computer.
#### Windows: