gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-23 10:23:15 +00:00
Code Issues Projects Releases Wiki Activity

AFHDS2A: LQI to RX channel

Browse Source
This commit is contained in:
Pascal Langer
2018-11-20 21:04:29 +01:00
parent 6c7312a09c
commit bd78739217
4 changed files with 94 additions and 68 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
Multiprotocol/_Config.h
View File

@@ -213,7 +213,9 @@
//AFHDS2A specific settings
//-------------------------
//TODO: make LQI available on RX channel
//When enabled (remove the "//"), the below setting makes LQI (Link Quality Indicator) available on one of the RX ouput channel (5-14).
//#define AFHDS2A_LQI_CH 14
/**************************/
/*** FAILSAFE SETTINGS ***/
@@ -435,6 +437,20 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
/* 14 */ {PROTO_MT99XX, MT99 , 0 , P_HIGH , NO_AUTOBIND , 0 },
#endif
};
// RX_Num is used for TX & RX match. Using different RX_Num values for each receiver will prevent starting a model with the false config loaded...
// RX_Num value is between 0 and 15.
// Power P_HIGH or P_LOW: High or low power setting for the transmission.
// For indoor P_LOW is more than enough.
// Auto Bind AUTOBIND or NO_AUTOBIND
// For protocols which does not require binding at each power up (like Flysky, FrSky...), you might still want a bind to be initiated each time you power up the TX.
// As an example, it's usefull for the WLTOYS F929/F939/F949/F959 (all using the Flysky protocol) which requires a bind at each power up.
// It also enables the Bind from channel feature, allowing to execute a bind by toggling a designated channel.
// Option: the value is between -128 and +127.
// The option value is only valid for some protocols, read this page for more information: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md
/* Available protocols and associated sub protocols to pick and choose from
PROTO_FLYSKY
Flysky
@@ -603,17 +619,3 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
PROTO_GD00X
NONE
*/
// RX_Num is used for TX & RX match. Using different RX_Num values for each receiver will prevent starting a model with the false config loaded...
// RX_Num value is between 0 and 15.
// Power P_HIGH or P_LOW: High or low power setting for the transmission.
// For indoor P_LOW is more than enough.
// Auto Bind AUTOBIND or NO_AUTOBIND
// For protocols which does not require binding at each power up (like Flysky, FrSky...), you might still want a bind to be initiated each time you power up the TX.
// As an example, it's usefull for the WLTOYS F929/F939/F949/F959 (all using the Flysky protocol) which requires a bind at each power up.
// It also enables the Bind from channel feature, allowing to execute a bind by toggling a designated channel.
// Option: the value is between -128 and +127.
// The option value is only valid for some protocols, read this page for more information: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md