gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-28 07:23:17 +00:00
Code Issues Projects Releases Wiki Activity

SBUS and CPPM output

Browse Source
This commit is contained in:
Pascal Langer
2021-03-03 10:07:19 +01:00
parent d7c24d62ed
commit bb70116df0
10 changed files with 313 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Multiprotocol/_Config.h
View File

@@ -342,6 +342,19 @@
#define HOTT_FW_TELEMETRY // Forward received telemetry packets to be decoded by erskyTX and OpenTX
#define BAYANG_RX_TELEMETRY // Forward channels data to TX
/**************************/
/*** TRAINER SETTINGS ***/
/**************************/
// By default Multi uses the telemetry line to send the received channels using a RX protocol (FrSky, DSM, AFHDS2A, Bayang) to the radio.
// But this does not work on FrSky radios since the telemetry lines of the internal and external modules are shared (hardware limitation).
// Using one of the method below (both can be enabled) on a STM32 module enables to go around that issue but needs a hardware modification on the module itself.
//SBUS signal needs an inverter between the STM32 USART1 TX pin and the radio bay pin 2
//#define SEND_SBUS_SERIAL
//CPPM signal needs a resistor between the STM32 USART1 TX pin and the radio bay pin 2
//#define SEND_CPPM
/****************************/
/*** SERIAL MODE SETTINGS ***/
/****************************/