gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 18:27:53 +00:00
Code Issues Projects Releases Wiki Activity

Update Troubleshooting.md

Browse Source
This commit is contained in:
pascallanger 2017-01-25 17:18:45 +01:00 committed by GitHub
parent 2bbf672094
commit b9d988c712
1 changed files with 5 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
docs/Troubleshooting.md
View File

@ -33,6 +33,11 @@ If your module is always/sometime binding at power up without pressing the butto
- Arduino Pro Mini with an external status LED: to work around this issue connect a 10K resistor between D13 and 3.3V. - Arduino Pro Mini with an external status LED: to work around this issue connect a 10K resistor between D13 and 3.3V.
- 4in1 module V1 (check 4in1 pictures): to solve this issue, replacing the BIND led resistor (on the board back) of 1.2K by a 4.7K. - 4in1 module V1 (check 4in1 pictures): to solve this issue, replacing the BIND led resistor (on the board back) of 1.2K by a 4.7K.
FrSky & SFHSS bind issues are ususally due to Option=fine frequency tuning not set properly. This value is different for each Module. To determine this value:
- find a value where the RX accepts to bind. A good start is to use one of these values -40, 0 and 40.
- find the values min/max where the RX loses connection. In serial mode you can change the value and see the effect live.
- set the value to half way between min and max.
##Report issues ##Report issues
You can report your problem using the [GitHub issue](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues) system or go to the [Main thread on RCGROUPS](http://www.rcgroups.com/forums/showthread.php?t=2165676) to ask your question. You can report your problem using the [GitHub issue](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues) system or go to the [Main thread on RCGROUPS](http://www.rcgroups.com/forums/showthread.php?t=2165676) to ask your question.
Please provide the following information: Please provide the following information: