From b9b0420c2110b7bde43e4292d2f48f0e8a85e453 Mon Sep 17 00:00:00 2001 From: midelic Date: Sun, 31 Jul 2016 19:13:06 +0300 Subject: [PATCH] Compilation/flashing info --- README.md | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index ca52aa5..4c66b7a 100644 --- a/README.md +++ b/README.md @@ -291,9 +291,11 @@ or other USB serial-TTL dongle. Important: -If using 3.3V USB-TTL device it is required to use a jumer on "3.3V jumper" on top of the board. -Before upload new firmware use a jumper on BOOT0. -After flashing new firmware it is required to remove both jumpers on 3.3 jumper and BOOT0. +If using 3.3V USB-TTL device it is required to use a jumper on "3.3V jumper" on top of the board. + +Before uploading new firmware use a jumper on BOOT0. + +After flashing new firmware it is required to remove both jumpers on 3.3V jumper and BOOT0. ##Troubleshooting