diff --git a/Lua_scripts/MultiChan.txt b/Lua_scripts/MultiChan.txt
index f8ed555..63855ff 100644
--- a/Lua_scripts/MultiChan.txt
+++ b/Lua_scripts/MultiChan.txt
@@ -172,7 +172,7 @@
 48,0,V761,3CH,0,Gyro,Calib,Flip,RtnAct,Rtn
 48,1,V761,4CH,0,Gyro,Calib,Flip,RtnAct,Rtn
 46,0,V911s,V911s,1,Calib,Rate
-46,1,V911s,E119,1,Calib,Rate
+46,1,V911s,E119,1,Calib,Rate,6G_3D
 22,0,WFLY,WFR0xS,0,CH5,CH6,CH7,CH8,CH9
 30,0,WK2x01,WK2801,0,CH5,CH6,CH7,CH8
 30,1,WK2x01,WK2401,0
diff --git a/Multiprotocol/Multiprotocol.h b/Multiprotocol/Multiprotocol.h
index b80be9d..9439ed9 100644
--- a/Multiprotocol/Multiprotocol.h
+++ b/Multiprotocol/Multiprotocol.h
@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	3
-#define VERSION_PATCH_LEVEL	2
+#define VERSION_PATCH_LEVEL	3
 
 #define MODE_SERIAL 0
 
diff --git a/Multiprotocol/V911S_ccnrf.ino b/Multiprotocol/V911S_ccnrf.ino
index df19361..d7cafcf 100644
--- a/Multiprotocol/V911S_ccnrf.ino
+++ b/Multiprotocol/V911S_ccnrf.ino
@@ -34,6 +34,7 @@
 #define	E119_FLAG_CALIB		0x40
 // flags going to packet[2]
 #define	V911S_FLAG_CALIB	0x01
+#define A220_FLAG_6G3D		0x04
 
 static void __attribute__((unused)) V911S_send_packet()
 {
@@ -70,8 +71,11 @@ static void __attribute__((unused)) V911S_send_packet()
 			packet[ 2]=GET_FLAG(CH5_SW,V911S_FLAG_CALIB);	// long  press on right button
 		}
 		else//E119
+		{
 			packet[ 1]=GET_FLAG(!CH6_SW,E119_FLAG_EXPERT)	// short  press on left button
 					  |GET_FLAG( CH5_SW,E119_FLAG_CALIB);	// short  press on right button
+			packet[ 2]=GET_FLAG( CH7_SW,A220_FLAG_6G3D);	// short  press on right button
+		}
 			
 		//packet[3..6]=trims TAER signed
 		uint16_t ch=convert_channel_16b_limit(THROTTLE ,0,0x7FF);
diff --git a/Protocols_Details.md b/Protocols_Details.md
index ccc639e..cbbd1d4 100644
--- a/Protocols_Details.md
+++ b/Protocols_Details.md
@@ -1289,7 +1289,9 @@ Models: WLtoys V911S, XK A110
 ### Sub_protocol E119 - *1*
 Models: Eachine E119, JJRC W01-J3, XK A220 P-40
 
-P-40 is using CH5 for 6G/3D.
+CH1|CH2|CH3|CH4|CH5|CH6|CH7
+---|---|---|---|---|---|---
+A|E|T|R|CALIB|RATE|6G_3D
 
 ## XK - *62*
 
@@ -1783,7 +1785,7 @@ Model: PROPEL 74-Z Speeder Bike
 
 Autobind protocol
 
-Telemetry: RSSI is equal to TX_LQI which indicates how well the TX receives the RX (0-100%). A1 voltage should indicate the numbers of life remaining (not tested). A2 is giving the model status using a bit mask: 0x80=flying, 0x08=taking off, 0x04=landing, 0x00=landed/crashed
+Telemetry: RSSI is equal to TX_LQI which indicates how well the TX receives the RX (0-100%). A1 (with a ratio of 25.5) voltage should indicate the numbers of life remaining 0.2->0.1->0.0(not tested). A2 (with a ratio of 25.5) is giving the model status: 12.8=flying, 0.8=taking off, 0.4=landing, 0=landed/crashed
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14
 ---|---|---|---|---|---|---|---|---|----|----|----|----|----