From b2dec9b3315c6795c403cf0aa57e112e6d2767de Mon Sep 17 00:00:00 2001 From: pascallanger Date: Wed, 12 Feb 2025 11:57:04 +0100 Subject: [PATCH] Update Protocols_Details.md --- Protocols_Details.md | 36 ++++++++++++------------------------ 1 file changed, 12 insertions(+), 24 deletions(-) diff --git a/Protocols_Details.md b/Protocols_Details.md index c320a27..bbcf85b 100644 --- a/Protocols_Details.md +++ b/Protocols_Details.md @@ -1520,36 +1520,24 @@ Models: WLtoys cars 284131/284161/284010/124016/124017/144010 and Eachine EAT14 You must assign a different RX number for each receiver/plane. Otherwise the new receiver/plane ID will overwrite the previous one. +If a CC2500 is installed it will be used for this sub protocol. Option in this case is used for fine frequency tuning like any CC2500 protocols so check the [Frequency Tuning page](/docs/Frequency_Tuning.md). + +If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components. + +CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8 +---|---|---|---|---|---|---|--- +A|E|T|R|Rate|Mode|Hover|Light + +The plane does not need to be bound each time if it is powered on **after** the radio/protocol is on. + +The rudder trim is driven from the rudder channel to increase the range (Original TX rudder has no range once the motor has been turned on...). + ### Sub_protocol X4 - *0* Transmitter: XK X4-A160, X5S, model: XK A160S, XK A280, XK A300 -If a CC2500 is installed it will be used for this sub protocol. Option in this case is used for fine frequency tuning like any CC2500 protocols so check the [Frequency Tuning page](/docs/Frequency_Tuning.md). - -If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components. - -CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8 ----|---|---|---|---|---|---|--- -A|E|T|R|Rate|Mode|Hover|Light - -The plane does not need to be bound each time if it is powered on **after** the radio/protocol is on. - -The rudder trim is driven from the rudder channel to increase the range (Original TX rudder has no range once the motor has been turned on...). - ### Sub_protocol P10 - *1* Model: Park10 J3-CUB -If a CC2500 is installed it will be used for this sub protocol. Option in this case is used for fine frequency tuning like any CC2500 protocols so check the [Frequency Tuning page](/docs/Frequency_Tuning.md). - -If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components. - -CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8 ----|---|---|---|---|---|---|--- -A|E|T|R|Rate|Mode|Hover|Light - -The plane does not need to be bound each time if it is powered on **after** the radio/protocol is on. - -The rudder trim is driven from the rudder channel to increase the range (Original TX rudder has no range once the motor has been turned on...). - *** # NRF24L01 RF Module