From b08bcf041bac8253557aca7c1f4a31ce750bffa7 Mon Sep 17 00:00:00 2001 From: LapinFou Date: Wed, 19 Apr 2017 09:53:15 +0200 Subject: [PATCH] Fixed compiling page. --- docs/Compiling.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/Compiling.md b/docs/Compiling.md index f7249a0..7800625 100644 --- a/docs/Compiling.md +++ b/docs/Compiling.md @@ -17,20 +17,20 @@ The procedure below will guide you through all the steps to upload successfully 1. USBASP programmer supporting 3.3V: -[(example aliexpress link)](https://www.aliexpress.com/item/USBasp-USB-ISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-ATMEGA128-New-10PIN-Wire-Support/2036402518.html?spm=2114.30010308.8.10.jIbHzs) +[Example aliexpress link](https://www.aliexpress.com/item/USBasp-USB-ISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-ATMEGA128-New-10PIN-Wire-Support/2036402518.html?spm=2114.30010308.8.10.jIbHzs) There are reports that some of the cheap programmers are not safe to use with 3.3V units, usually the black PCB versions are ok. 1. 10pin to 6pin adapter: -[(example ebay link)](http://www.ebay.fr/itm/10-Pin-a-6-Pin-Carte-Adaptateur-M-F-pour-AVRISP-USBASP-STK500-Noir-Bleu-WT-/291862396761?hash=item43f45abf59:g:gXsAAOSwMgdXyGnh) +[Example ebay link](http://www.ebay.fr/itm/10-Pin-a-6-Pin-Carte-Adaptateur-M-F-pour-AVRISP-USBASP-STK500-Noir-Bleu-WT-/291862396761?hash=item43f45abf59:g:gXsAAOSwMgdXyGnh) 1. 6 pin header like this one: -[(example Digi-Key link)](http://www.digikey.com/products/en?keywords=3M%20961206-6404-AR) +[Example Digi-Key link](http://www.digikey.com/products/en?keywords=3M%20961206-6404-AR) 1.The 6 Pin header needs to be solder on the board like indicated by the red rectangle: - * Banggood readymade 4-in-1 module: + - Banggood readymade 4-in-1 module: - * DIY Mulitprotocol modules (like the 2.3d board): + - DIY Mulitprotocol modules (like the 2.3d board): - * Arduino Pro Mini module: + - Arduino Pro Mini module: ### Connect the programmer